Unit of competency Outline

Date retreived
22/07/2026 3:22 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use locating devices

Use locating devices

Unit of competency
National Code
NWPNET012
State Code
AVY79
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/04/2016
Nominal Hours
30
Description
This unit describes skills required to determine and mark the location and identity of gas, water, electrical, telecommunications and other underground utility services using a range of specialised instruments and asset plans.This unit applies to those working as field staff with a specific responsibility for identifying the presence and exact position of utility services prior to commencing work tasks involving excavation.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS and manufacturer specifications.Those undertaking this unit would work under indirect supervision, while performing routine tasks, in a familiar context, ensuring minimum damage to the environment. No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for locating services
  • 1.1 Determine work site boundaries and task requirements from plans, specifications and instructions.
  • 1.2 Use available information sources for the location of underground services and consider the presence of undocumented services.
  • 1.3 Select and check appropriate pipe and cable locating equipment.
  • 1.4 Assess hazards associated with underground services and plan preventive measures.
2. Operate pipe and cable locating equipment
  • 2.1 Mark work site boundaries and set up work site.
  • 2.2 Operate pipe and cable locating equipment.
  • 2.3 Interpret false signals or interference with pipe and cable locating equipment and make appropriate compensation.
  • 2.4 Identify and remedy malfunctions of locating instruments.
  • 2.5 Mark the approximate location of services on the surface of the work site.
  • 2.6 Conduct test excavation to visually confirm service location.
3. Maintain locating equipment
  • 3.1 Perform daily maintenance of equipment.
  • 3.2 Record maintenance details in a logbook.
No information
No information
Replaces
State Code National Code Title Type
D1908 NWP330B Establish positions of underground utilities using locating devices Unit of competency
State Code National Code Title Type
AYW7 NWP30215 Certificate III in Water Industry Operations Qualification