Unit of competency Outline

Date retreived
23/07/2026 1:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install underground enclosures and conduit

Install underground enclosures and conduit

Unit of competency
National Code
ICTCBL307
State Code
AWE75
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to install underground enclosures and conduit, either direct buried or in pits, for new or cable maintenance tasks in access networks for outdoor installations within client premises or in public locations permitted by the Australian Communications and Media Authority (ACMA).It applies to technical staff who install underground infrastructure for new and upgraded telecommunications cabling for domestic, commercial or industrial clients. Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the Implementation Guide Companion Volume or the relevant regulator for specific guidance on requirements.
Notes
Elements and Performance Criteria
1. Prepare for installation of underground enclosure and conduit
  • 1.1 Prepare for given work according to relevant legislation, codes, regulations and standards
  • 1.2 Arrange access to site according to required procedure
  • 1.3 Inform appropriate personnel of existing and potential hazards on worksite
  • 1.4 Verify location of proposed installation according to appropriate plans obtained from authorised personnel
  • 1.5 Obtain information on location of other services from relevant authorities
  • 1.6 Organise tools and equipment for given work and safe work practice
  • 1.7 Erect barriers according to safety requirements
2. Install enclosure and conduit
  • 2.1 Excavate site, maintaining stability and allowing ease of access
  • 2.2 Construct or install enclosure or pit according to design specifications and following work health and safety (WHS) and environmental requirements
  • 2.3 Install conduit to specifications and manufacturer’s requirements, ensuring that internal surfaces are free from impediments and sharp edges due to cable hauling
  • 2.4 Seal conduit entry into enclosure against ingress of foreign matter
  • 2.5 Install cable support structure and access facilities in pits to specifications
3. Restore site and complete documentation
  • 3.1 Complete backfill safely using suitable spoil and materials that ensure conduit protection
  • 3.2 Reinstate site to identified requirements
  • 3.3 Complete reports on installation and design amendments accurately and file promptly according to enterprise requirements
  • 3.4 Notify client and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3324 ICTCBL3018A Install underground enclosures and conduit Unit of competency
Replaced By
State Code National Code Title Type
OBA54 ICTCBL334 Install underground enclosures and conduit Unit of competency