Unit of competency Outline

Date retreived
24/07/2026 12:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce drawings for reticulated services

Produce drawings for reticulated services

Unit of competency
National Code
MEM09207
State Code
OEW69
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
60
Description
This unit of competency defines the skills and knowledge required to produce detailed engineering drawings for reticulated services to Australian Standard (AS) 1100.101 Technical drawing - General principles and is primarily for those performing drafting work within the air conditioning and mechanical services industry related to the installation of reticulated services in commercial and industrial buildings.Critical dimensions and specifications for the drawing are predetermined and drawings are carried out with or without the use of computer-aided design (CAD) systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Identify job requirements from available information
  • 1.4 Check purpose and scope of drawing and identify and address further information needs
  • 1.5 Identify and prepare required equipment to complete work
  • 1.6 Identify and access organisational files, templates and symbols
2. Identify working principles for reticulated systems
  • 2.1 Identify principles and application of reticulation system
  • 2.2 Identify the operational requirements of reticulation system
  • 2.3 Identify safety and environmental implications of reticulated system
3. Produce drawings for reticulated systems
  • 3.1 Lay out drawing in accordance with the sketches and supplied specifications
  • 3.2 Identify different parts of services on drawings
  • 3.3 Size the system in accordance with relevant standards, regulations and SOPs
  • 3.4 Apply working principles of reticulated systems to drawing
  • 3.5 Apply codes, standards and symbols used for reticulated services installation drawings
  • 3.6 Present drawing in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
WE062 MEM09207A Produce drawings for reticulated services Unit of competency
State Code National Code Title Type
BIW7 MEM50222 Diploma of Engineering - Technical Qualification
BIW9 MEM40422 Certificate IV in Engineering Drafting Qualification