Unit of competency Outline
Date retreived
23/07/2026 9:43 PM AWST
23/07/2026 9:43 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Undertake eddy current array tests
Undertake eddy current array tests
Unit of competency
National Code
MEM24035
MEM24035
State Code
OFH23
OFH23
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
08/04/2026
Field of Education
030305 - Materials Engineering
Original Release Date
08/04/2026
Nominal Hours
55
Description
This unit of competency defines the skills and knowledge required by non-destructive testing (NDT) technicians to perform eddy current array testing to the level described in relevant Australian and international standards and codes. The unit applies to eddy current array testing undertaken in a range of industrial applications including testing on fabrications, structures and components. Eddy current array testing may be performed by NDT technicians in a wide range of industries and sectors including mechanical or mechatronics engineering, manufacturing, aerospace, and associated industry sectors.The unit covers calibration, set-up, and use of eddy current array fixed and mobile testing equipment, selection of the most appropriate testing technique and probes, interpreting results including classifying defects and reporting of test results. Techniques covered include eddy current array surface testing and eddy current array tube testing. These employees work under the general supervision of personnel such as engineering associates, NDT technicians aligned to level 3 in technical standards; professional engineers and scientists; engineering technologists; and production, operations and maintenance managers.Where interpretation of technical drawings is required, unit MEM09229 Read and interpret technical drawings should also be selected.Where the selection and use of engineering measurement is required, unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of hand tools are required unit MEM18001 Use hand tools should also be selected.Where the selection and use of power tools are required, unit MEM18002 Use power tools/hand held operations should also be selected.Band: BUnit Weight: 6Assessment as competent against MEM24035 Undertake eddy current array tests may contribute to certification against Australian standards where the assessment in this unit of competency is carried out in conjunction with an examining authority as described in AS ISO 9712 NDT - Qualification and certification of personnel or subsequent Standards.
Notes
Elements and Performance Criteria
1. Establish job requirements
- 1.1 Comply with relevant WHS and regulatory requirements, standards, codes of practice and standard operating procedures (SOPs) for eddy current array testing
- 1.2 Identify job requirements from specifications, job sheets or work instructions
2. Prepare for testing
- 2.1 Liaise with client to explain testing requirements and schedule tests
- 2.2 Use established safe work practices and personal protective equipment (PPE) in accordance with SOPs
- 2.3 Identify inspection areas and determine if special access requirements appropriate for the NDT test need to be communicated to the client
- 2.4 Clean and prepare for testing using appropriate procedures and materials
- 2.5 Assess inspection areas visually and identify obvious discontinuities
3. Conduct eddy current array tests
- 3.1 Select the most appropriate eddy current array test technique for the material or application
- 3.2 Select test equipment and appropriate probe type and shape
- 3.3 Conduct reference calibration in accordance with relevant standards, codes and/or procedures
- 3.4 Optimise test set up by calculating effects on probe dimensions, frequency and phase of induced field and material conductivity on eddy current penetration
- 3.5 Conduct eddy current test(s) in accordance with relevant standards, codes, work instructions and WHS requirements
- 3.6 Store and maintain eddy current array testing equipment in accordance with SOPs and WHS requirements
4. Interpret and report results of eddy current array tests
- 4.1 Review conduct of the test and confirm test procedures were applied correctly
- 4.2 Monitor scans and assess indications for discontinuities, defects and other data required in test report
- 4.3 Apply acceptance criteria to discontinuities to detect defects
- 4.4 Classify defects in accordance with test specification and relevant standards
- 4.5 Report test results and complete all job records in accordance with relevant standards, test specifications and workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| OFD81 | MEM24016 | Perform eddy current array tests | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BOZ1 | MEM50425 | Diploma of Engineering - Non-Destructive Testing | Qualification |