Unit of competency Outline

Date retreived
21/07/2026 11:42 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply an understanding of environmental principles to a site

Apply an understanding of environmental principles to a site

Unit of competency
National Code
MSS024015
State Code
OAE99
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/10/2018
View on TGA
State Implementation and Classification
Approved Date
19/02/2019
Field of Education
050999 - Environmental Studies, N.e.c.
Original Release Date
19/02/2019
Nominal Hours
140
Description
This unit describes the skills and knowledge to read the landscape in terms of the physical and biological components of the environment and the ecological linkages in operation at a site. Personnel are required to apply basic principles of geomorphology, hydrology and ecology in a systematic, scientific appraisal of site condition. This requires sufficient knowledge of chemistry, physics, geology and biology to support a scientific approach to field ecology.This unit of competency is applicable to environmental technicians working in a range of industry sectors, such as environmental monitoring, and sampling; environmental compliance, auditing and inspection; groundwater and clean water; water treatment, storm and wastewater management; solid and hazardous waste management; site remediation; management of contaminated sites; geotechnical services and civil engineering; and natural resource management.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Prepare for site inspection
  • 1.1 Read and use maps, photos and related documentation to gain a preliminary understanding of site features
  • 1.2 Collect site-specific or regional data on expected flora, fauna, soils and climate
  • 1.3 Access and read site history and previous environmental or ecological studies
  • 1.4 Access and read all emergency plans, risk assessments, and safety and environmental management requirements associated with the field activities
  • 1.5 Access and read legislative and planning instruments applicable to current and future site usage
  • 1.6 Confirm site access requirements and identify potential site hazards
2 Conduct initial site survey
  • 2.1 Sketch, map or photograph the site
  • 2.2 Observe and record the surface geology and geomorphology of the site
  • 2.3 Observe and record hydrology of the site
  • 2.4 Observe and record the major flora of the site
  • 2.5 Observe and record evidence of site fauna
  • 2.6 Observe and record infrastructure and other modifications to the site
  • 2.7 Assess the potential for presence of cultural and indigenous heritage items and record findings
  • 2.8 Check for evidence of illegal or inappropriate activities
3 Make an initial assessment of site condition
  • 3.1 Use geomorphological and hydrological observations to describe surface condition and infer potential future impacts
  • 3.2 Make inferences on apparent ecological health of the site to plan for an initial ecological study of the site
  • 3.3 Determine the physical, chemical and biological parameters that would need to be measured and sampled during subsequent ecological appraisal of the site
4 Prepare for field study
  • 4.1 Identify and describe the biological and chemical components of interest, sampling areas and field techniques to be used
  • 4.2 Identify, obtain and check required equipment and materials required for field study
  • 4.3 Securely stow all field equipment in vehicle to prevent damage in transit
  • 4.4 Safely transport all field equipment to site and prepare it for use
5 Perform a basic ecological field study of the site
  • 5.1 Perform ecological sampling for abundance and diversity parameters using the general techniques of transects and quadrats
  • 5.2 Record descriptions of the habitat structure
  • 5.3 Perform sampling for simple population, demographic and age structure parameters
  • 5.4 Perform simple sampling and measurements on abiotic components
  • 5.5 Perform simple targeted species sampling
  • 5.6 Comply with legislation, policy, codes of practice and accepted workplace procedures
6 Finalise field study
  • 6.1 Store all samples and data safely
  • 6.2 Rehabilitate sampling sites to render them safe and minimise environmental impacts
  • 6.3 Clean all equipment, containers, work area and vehicles according to workplace procedures
  • 6.4 Pack and safely transport all samples, equipment and supplies back to home base
  • 6.5 Ensure dispatch of collected samples for subsequent analysis
  • 6.6 Check serviceability of all equipment before storage
7 Process and present field data
  • 7.1 Summarise field data using simple calculations, graphs, tables and maps
  • 7.2 Write reports that include simple conclusions and interpretations based on raw or summarised data
8 Maintain a safe work environment
  • 8.1 Use defined safe work practices and personal protective equipment (PPE)
  • 8.2 Minimise the generation of waste
  • 8.3 Collect and dispose of all hazardous wastes safely
No information
No information
Replaces
State Code National Code Title Type
BAK93 MSS024003 Apply an understanding of environmental principles to a site Unit of competency
Replaced By
State Code National Code Title Type
OES39 MSS024027 Participate in environmental field work Unit of competency