Unit of competency Outline

Date retreived
22/07/2026 11:42 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Support underground shotfiring operations

Support underground shotfiring operations

Unit of competency
National Code
RIIBLA202E
State Code
AWB54
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/12/2015
View on TGA
State Implementation and Classification
Approved Date
14/07/2016
Field of Education
030303 - Mining Engineering
Original Release Date
14/07/2016
Nominal Hours
80
Description
This unit describes a participant’s skills and knowledge required to support underground shotfiring operations in Coal and Metalliferous mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between States, Territories and industry sectors. Relevant information must be sourced prior to the application of this unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for supporting shotfiring
  • 1.1 Access, interpret and apply blasting documentation and ensure the work activity is compliant
  • 1.2 Obtain, confirm and apply shotfiring requirements, shift briefings, handover details and/or work orders before proceeding
  • 1.3 Access, interpret and apply environmental, geological and survey data
  • 1.4 Identify, manage and report all potential hazards, risks and environmental issues
  • 1.5 Select and wear personal protective equipment appropriate to the work activities
  • 1.6 Obtain and interpret emergency procedures and be prepared for fire/accident/emergency
  • 1.7 Undertake coordination requirements with others prior to commencement of, and during, the work activity
2. Provide support at the blast site
  • 2.1 Establish, secure and isolate shot site
  • 2.2 Ensure holes are drilled to authorised pattern design, with specific reference to geology, hazards, and safety
  • 2.3 Flush or clean and test drill holes
  • 2.4 Apply explosion inhibitor
  • 2.5 Identify and report any deteriorated explosives and accessories
  • 2.6 Ensure explosives are transported in accordance with requirements and procedures
  • 2.7 Load and stem the explosive
  • 2.8 Recognise and respond to hazardous and emergency situations
3. Clear the site
  • 3.1 Remove equipment and facilities not required from the shot site
  • 3.2 Ensure muck out is completed
  • 3.3 Assist responsible person to secure the shot site when leaving
No information
No information
Replaces
State Code National Code Title Type
WH020 RIIBLA202D Support underground shotfiring operations Unit of competency
Replaced By
State Code National Code Title Type
OAK92 RIIBLA202F Support underground shotfiring operations Unit of competency