Unit of competency Outline
Date retreived
21/07/2026 11:41 PM AWST
21/07/2026 11:41 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Construct models
Construct models
Unit of competency
National Code
HLTDT1A
HLTDT1A
State Code
C4997
C4997
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
10/02/2003
Field of Education
060705 - Dental Technology
Original Release Date
10/02/2003
Nominal Hours
30
Description
Notes
Elements and Performance Criteria
No information
Models are poured in to appropriate model materials from these impressions:
Rigid impression materials
Aqueous elastomers
Non-aqueous elastomers
The range of impressions will include:
Edentulous impressions
Dentulous impressions
Partially dentulous
Rigid impression materials
Aqueous elastomers
Non-aqueous elastomers
The range of impressions will include:
Edentulous impressions
Dentulous impressions
Partially dentulous
Critical aspects of assessment:
The models produced must be suitable for the construction of dental prostheses or appliances
All work complies with relevant legislative requirements
Underpinning knowledge:
Relevant material science for carrying out procedures
Anatomy (head and neck)
OHS and material safety data sheets
Current NHMRC infection control guidelines
Underpinning skills:
Cleanliness
Accuracy
Manual dexterity
Planning of work
Interdependent assessment of units:
This unit may be assessed with other units making up a job role:
HLTIN1A Comply with infection control policies and procedures is a pre-requisite unit.
Resource implications:
This unit should be assessed by direct observation at work or through simulation. A simulated environment must contain all necessary equipment.
The models produced must be suitable for the construction of dental prostheses or appliances
All work complies with relevant legislative requirements
Underpinning knowledge:
Relevant material science for carrying out procedures
Anatomy (head and neck)
OHS and material safety data sheets
Current NHMRC infection control guidelines
Underpinning skills:
Cleanliness
Accuracy
Manual dexterity
Planning of work
Interdependent assessment of units:
This unit may be assessed with other units making up a job role:
HLTIN1A Comply with infection control policies and procedures is a pre-requisite unit.
Resource implications:
This unit should be assessed by direct observation at work or through simulation. A simulated environment must contain all necessary equipment.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C9186 | HLTDT301B | Construct models | Unit of competency |
| D8180 | HLTDT301C | Construct models | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| C449 | HLT50502 | Diploma of Dental Technology | Qualification |
| 6858 | 51179 | Certificate IV in Dental Technology | Accredited course |