Unit of competency Outline

Date retreived
23/07/2026 7:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist grouting or cementing operations

Assist grouting or cementing operations

Unit of competency
National Code
RIINHB218D
State Code
WH468
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
28/05/2014
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to assist grouting or cementing operations in Drilling.This unit is appropriate for those working in drillers assistant roles.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for assisting the grouting or cementing operations
  • 1.1 Access, interpret and apply assist grouting or cementing operations, documentation and ensure work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Communicate and coordinate activities with others throughout the work activity
  • 1.6 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Operate ancillary equipment
  • 2.1 Start-up ancillary equipment as per manufacturers instruction
  • 2.2 Appropriately run ancillary equipment
  • 2.3 Shut down ancillary equipment as per manufacturers instruction
3. Perform basic measurement and calculations
  • 3.1 Use and read tape measure accurately
  • 3.2 Carry out simple calculations and measurements of tank capacities, casing and rod lengths
  • 3.3 Record or complete tally sheets for number of lengths of casing placed in the hole
  • 3.4 Record results legibly on all reports
4. Grout and cement hole
  • 4.1 Mix grout and additives
  • 4.2 Access, interpret and apply safety data sheets (SDS) requirements for all materials used
  • 4.3 Apply grout/cement using appropriate techniques, and complete grouting/cementing
  • 4.4 Avoid spillage of grout, cement or additives
  • 4.5 Construct well head, hole identification and install hole security devices
  • 4.6 Dispose of any excess grout or cement according to site waste management procedures
  • 4.7 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
5. Clean all equipment at completion of grouting or cementing
  • 5.1 Operate cleaning equipment
  • 5.2 Ensure that all cleaning equipment is kept in good working condition
  • 5.3 Complete housekeeping activities
  • 5.4 Process records
No information
No information
Replaces
State Code National Code Title Type
WB172 RIINHB218A Assist grouting or cementing operations Unit of competency
Replaced By
State Code National Code Title Type
OBW33 RIINHB218E Assist grouting and cementing operations Unit of competency
State Code National Code Title Type
AZE4 RII20915 Certificate II in Drilling Operations Qualification
J685 RII20913 Certificate II in Drilling Operations Qualification