Unit of competency Outline

Date retreived
22/07/2026 5:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, test and service charging systems

Inspect, test and service charging systems

Unit of competency
National Code
AURETR013
State Code
AXD90
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to inspect, test and service vehicle, vessel and machinery charging systems. It involves preparing for the task, inspecting charging systems, servicing the systems, and completing workplace processes and documentation, including any associated recommendations for further action.It applies to those working in the automotive service and repair industry. The charging systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect, test and service charging system
  • 1.1 Job requirements are determined according to workplace instructions
  • 1.2 Inspection, testing and servicing procedures are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are reported
  • 1.4 Tools and equipment, including multimeter, are selected and checked for serviceability
2. Inspect and test system
  • 2.1 System is inspected and tested according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Charging circuit is tested according to workplace procedures and without causing damage to components or systems
  • 2.3 Inspection results are compared with manufacturer specifications
  • 2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
3. Service system
  • 3.1 System is serviced according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.3 Post-service testingis carried out to confirm charging system is operating to manufacturer specifications and that no other problems are present
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recycle material is collected
  • 4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF093 AURETR2013 Inspect and service charging systems Unit of competency