Unit of competency Outline

Date retreived
23/07/2026 6:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Saw logs using CNC optimising systems

Saw logs using CNC optimising systems

Unit of competency
National Code
FWPSAW3249
State Code
OBM15
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
29/05/2020
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to set up and operate computer numerical control (CNC) optimising systems and saws to maximise timber output from every log. The unit applies to individuals who saw logs using CNC optimising systems in forest and forest product factory settings.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for machining
  • 1.1 Review work order and, where required, check with appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with manufacturing profile cutters
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Plan log sawing process in line with work order
2. Set up optimising system
  • 2.1 Set CNC optimising program to job specifications
  • 2.2 Check safety equipment and saw and cutting mechanisms for safe and effective operation
  • 2.3 Adjust saw settings in line with work order
  • 2.4 Conduct trial runs to check system operation, accuracy and quality of finished work
  • 2.5 Complete final adjustments to CNC optimising program and equipment in line with organisational procedures
3. Operate optimising log saw
  • 3.1 Use equipment in line with organisational safety procedures, manufacturer instructions and environmental protection practices
  • 3.2 Complete pre-start-up checks to ensure operational effectiveness
  • 3.3 Feed logs into machine, operate saw and monitor use to minimise waste and ensure quality product and output
  • 3.4 Repair or dispose of sub-standard product in line with environmental protection practices
  • 3.5 Direct processed logs to designated area in line with work order
  • 3.6 Identify routine processing problems, and resolve or report to appropriate personnel
4. Complete operator maintenance
  • 4.1 Follow organisational safety procedures to lock out equipment
  • 4.2 Check saw blades for bluntness or damage
  • 4.3 Remove and replace saw blades in line with manufacturer recommendations
  • 4.4 Dispose of used blades in line with environmental protection practices
  • 4.5 Complete basic non-specialist maintenance for equipment
  • 4.6 Keep machine clear of dust and debris in line with organisational safety procedures
  • 4.7 Record and report equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXJ83 FWPSAW3226 Saw logs using CNC optimising systems Unit of competency
Replaced By
State Code National Code Title Type
OFC86 FWPSAW3254 Control and monitor automated green mill saw line Unit of competency