Unit of competency Outline
Date retreived
23/07/2026 9:11 PM AWST
23/07/2026 9:11 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fault find, test and calibrate instrumentation systems and equipment
Fault find, test and calibrate instrumentation systems and equipment
Unit of competency
National Code
MEM18054B
MEM18054B
State Code
W5600
W5600
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
26/10/2006
Field of Education
031303 - Electronic Engineering
Original Release Date
26/10/2006
Nominal Hours
72
Description
This unit covers the testing of instrumentation systems and equipment; applying data collection techniques and localising fault conditions; analysing and reporting test results; and calibrating instrumentation systems and components.
Notes
Elements and Performance Criteria
1. Test instrumentation systems and equipment
- 1.1. Work/test requirements are identified and defined to standard operating procedures.
- 1.2. Correct test application principles are selected after inspection of instrumentation systems, equipment/components.
- 1.3. Appropriate test equipment is selected in accordance with defined requirements.
- 1.4. Device isolation methods/requirements are observed and localised.
- 1.5. Appropriate test procedures and application principles are applied in assessing operation of instrumentation systems, equipment/components.
- 1.6. Normal operating characteristics of instrumentation systems, equipment/components are applied to the level necessary to identify and localise faults.
- 1.7. Characteristics/operational function assessment procedures are applied according to safety and regulatory/site specifications.
- 1.8. Characteristics and operational function is checked and verified.
2. Apply data collection techniques and localise fault conditions
- 2.1. Drawings/diagrams and operational specifications are utilised in identifying and localising fault conditions.
- 2.2. Where appropriate, built-in fault indicators, error codes are examined and correctly interpreted and results are recorded to standard operating procedures.
- 2.3. Fault condition is localised to major component level using appropriate test equipment principles and procedures.
3. Analyse and report test results
- 3.1. Test results are analysed/verified against operational specifications and localised faults are confirmed.
- 3.2. Potential and real faults are reported using standard operating procedures.
- 3.3. Faulty conditions are evaluated and corrective action is planned.
- 3.4. Action plan is recorded and documented according to standard operating procedures.
4. Calibrate instrumentation equipment/components
- 4.1. Zero, span and range checks are undertaken on indicators/controllers using correct and appropriate configuration.
- 4.2. Where applicable, methods of adjustment using calibration devices are performed and documented to prescribed procedures and operational specifications.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Instrumentation systems
Made up of more than one interdependent component controlling and processing multiple inputs and/or outputs
Equipment
Process machines, temperature control systems, sterilisation units, water cooling/filtration systems; equipment utilising mechanical, pneumatic/electro-pneumatic or electronic principles, associated instruments measuring level, pressure light, flow, current, resistance, voltage, density, temperature
Components
Sensors, transmitters, converters, indicators, analysers, controllers, transducers, power supplies, removable circuit boards and sensor units associated with determining/controlling density, level, flow, temperature, composition etc. of a range of materials
Test equipment
System calibrators, manometers, dead weight testers, wheatstone bridge, potentiometers, frequency/signal generators, logic probes, multimeters, (analog/digital), test gauges, cathode ray oscilloscopes and other associated equipment
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Instrumentation systems
Made up of more than one interdependent component controlling and processing multiple inputs and/or outputs
Equipment
Process machines, temperature control systems, sterilisation units, water cooling/filtration systems; equipment utilising mechanical, pneumatic/electro-pneumatic or electronic principles, associated instruments measuring level, pressure light, flow, current, resistance, voltage, density, temperature
Components
Sensors, transmitters, converters, indicators, analysers, controllers, transducers, power supplies, removable circuit boards and sensor units associated with determining/controlling density, level, flow, temperature, composition etc. of a range of materials
Test equipment
System calibrators, manometers, dead weight testers, wheatstone bridge, potentiometers, frequency/signal generators, logic probes, multimeters, (analog/digital), test gauges, cathode ray oscilloscopes and other associated equipment
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to fault find, test, calibrate instrumentation systems and equipment. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with fault finding, testing, calibrating instrumentation systems and equipment or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to fault find, test, calibrate instrumentation systems and equipment. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with fault finding, testing, calibrating instrumentation systems and equipment or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M0461 | MEM18.54AA | Fault find, test, calibrate instrumentation systems, equipment | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAU63 | MEM18054 | Fault find, test and calibrate instrumentation systems and equipment | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W239 | MEM30405 | Certificate III in Engineering - Electrical/Electronic Trade | Qualification |
| W237 | MEM30205 | Certificate III in Engineering - Mechanical Trade | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |