Unit of competency Outline

Date retreived
23/07/2026 12:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Glaze and re-glaze residential windows and doors

Glaze and re-glaze residential windows and doors

Unit of competency
National Code
MSFGG2008
State Code
WI480
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
10/09/2015
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040323 - Glazing
Original Release Date
19/06/2014
Nominal Hours
72
Description
This unit of competency covers fitting glass to residential windows and doors, other openings, or to other frames performed in workplaces involving on-site and off-site fabrication, installation and replacement of glass. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Work requirements for the type of glass to be used and the method of fixing are identified from work instructions
  • 1.2 Work health and safety (WHS) requirements for glazing/re-glazing of windows and doors, including personal protective equipment, are observed throughout the work
  • 1.3 The process for fitting glass to window and doorframes is identified
2 Prepare for work
  • 2.1 Work sequence is planned in a logical order to suit the job and in accordance with workplace procedures
  • 2.2 Tools, equipment and materials (other than glass and frames) are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
  • 2.3 Type of glass to be fitted and frames are selected to match job requirements and glass checked for type, size and imperfections
  • 2.4 Glass fixing method is selected and frame condition is assessed to ensure suitability for glazing in accordance with customer order and Australian Standards
  • 2.5 Defective frames are reported for repair or replacement in accordance with workplace procedures
  • 2.6 Fixing and sealing materials are prepared by mixing or cutting to length, as appropriate
3 Identify site conditions and restraints
  • 3.1 On-site difficulties are recognised and corrective action taken in accordance with regulations and workplace requirements
  • 3.2 Covering material is applied, where necessary, to protect existing fixtures and fittings
  • 3.3 Special characteristics of the window or door which may affect the finished job are identified and corrective action taken
  • 3.4 Prefabricated, modular scaffolding system to a maximum of one platform is erected safely and in the correct order of assembly, if required
  • 3.5 Access stairway or ladder and edge protection components are fitted to the modular scaffolding, where used
4 Perform glazing
  • 4.1 Frame is prepared to receive glass by checking size against specifications, removing remains of glass and any sealants, cleaning and surface preparation, if required
  • 4.2 Glass is fixed to the frame using the selected method and in accordance with recognised industry procedures and Australian Standards
  • 4.3 Solvents and sealants are used in accordance with manufacturer recommendations and Australian Standards
  • 4.4 Excess sealing material is removed and glass and frame cleaned after fixing
5 Complete work
  • 5.1 Completed installation is checked to ensure compliance with customer requirements and specifications
  • 5.2 Prefabricated modular scaffolding, where used, is dismantled safely in the correct order and packed for transport
  • 5.3 Tools, equipment and materials are cleaned and stored following workplace procedures
  • 5.4 Work area is cleaned and left in a safe condition and rubbish disposed of, as appropriate
  • 5.5 Waste and scrap materials are removed for disposal or recycling, as required
  • 5.6 Workplace documentation is completed in accordance with workplace requirements including calculating the cost of glass, fittings, materials and labour
No information
No information
Replaces
State Code National Code Title Type
S7814 LMFGG2008C Glaze reglaze residential windows and doors Unit of competency
Replaced By
State Code National Code Title Type
OAJ27 MSFGG2011 Glaze and reglaze residential windows and doors Unit of competency