Unit of competency Outline

Date retreived
23/07/2026 1:04 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply innovation in contemporary leadlight and stained glass

Apply innovation in contemporary leadlight and stained glass

Unit of competency
National Code
MSFDG5005
State Code
OAJ94
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to use innovative techniques in the development of leadlight or stained glass works. It includes the adaptation of traditional techniques, such as leadlight and stained glass or other techniques, such as kiln-formed and laminated glass, and involves research and analysis of innovative ideas with glassworks produced through experimentation and subsequent refinement of new ideas and techniques.This unit applies to individuals working with designed glass.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify the potential or need for innovation
  • 1.1 Analyse design or production elements to determine areas where research and experimentation may be appropriate
  • 1.2 Assess the potential for the use of new techniques and media to maximise the effectiveness of leadlight and stained glass
2. Conduct research
  • 2.1 Select and access sources suitable for the research of historical, cultural and other factors that might influence techniques or media
  • 2.2 Research, adapt and use relevant ideas and approaches from other practitioners with consideration of intellectual property, moral rights and copyright requirements
  • 2.3 Identify appropriate specialists who may be able to contribute to the overall realisation of innovative leadlight and stained glass
  • 2.4 Maintain references in an accessible form to allow for future use
  • 2.5 Use research material to adapt styles for integration into leadlight and stained glass production
3. Experiment with techniques and media
  • 3.1 Conduct trials to establish the best ways in which the desired effect can be achieved
  • 3.2 Assess results of experimentation, balancing the need for creative effectiveness and cost practicality
  • 3.3 Select, adapt or introduce new materials, tools, equipment or technology for the achievement of different effects
  • 3.4 Consult colleagues to provide information on the results of experimentation and to make appropriate decisions on new techniques and media
  • 3.5 Set up or coordinate specific resource requirements which arise from the use of different techniques in accordance with workplace requirement.
No information
No information
Replaces
State Code National Code Title Type
WI653 MSFSL5005 Apply innovation in contemporary leadlight and stained glass Unit of competency
State Code National Code Title Type
BED1 MSF50118 Diploma of Stained Glass and Leadlighting Qualification