Unit of competency Outline

Date retreived
24/07/2026 1:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Determine compliance of steering and suspension modifications

Determine compliance of steering and suspension modifications

Unit of competency
National Code
AURLLD001
State Code
AXC62
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to advise customers on the compliance of steering and suspension modifications with Australian Design Rules (ADRs) for normal road usage. It involves clarifying modifications, determining modification compliance with ADRs, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The steering and suspension systems are those of four-wheel drive (4WD) vehicles, light vehicles and light commercial vehicles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Clarify details of steering and suspension modification
  • 1.1 Confirmation is sought, through discussion with the customer, of the nature of steering and suspension modification
  • 1.2 Modification specifications and dimensions are determined and documented
  • 1.3 Non-standard steering and suspension components are identified
2. Determine specific ADR information relating to modification
  • 2.1 ADR bulletin applicable to modification is sourced and ruling on the legality of intended modification is identified and interpreted
  • 2.2 Compliance of modification specifications with ADR requirements is identified and documented
  • 2.3 Interpretation of ruling in relation to intended modification is clarified and discussed with customer
3. Recommend a plan of action to achieve ADR requirements
  • 3.1 Suitable plan of action to meet ADR requirements is discussed and clarified with customer
  • 3.2 Workplace documentation, including recommendations for modification, is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF217 AURLLD3001 Determine compliance of steering and suspension modifications Unit of competency
Replaced By
State Code National Code Title Type
OAK13 AURLLD011 Determine compliance of steering and suspension modifications Unit of competency
State Code National Code Title Type
BAC9 AUR32516 Certificate III in Automotive Underbody Technology Qualification