Unit of competency Outline

Date retreived
22/07/2026 11:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Process glass by semi-automatic machines

Process glass by semi-automatic machines

Unit of competency
National Code
MSFGG3042
State Code
OAJ02
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
45
Description
This unit describes the skills and knowledge required to cut, drill, shape and edge glass using semi-automatic glass processing equipment.This unit applies to glass processing workers.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify work requirements
  • 1.1 Read work instructions and identify job requirements
  • 1.2 Identify and follow work health and safety requirements, using all required personal protective equipment
  • 1.3 Determine quality standards and identify procedures in accordance with workplace requirements and industry standards
  • 1.4 Plan sequence of work to ensure processing is conducted in a logical order
2. Prepare for work
  • 2.1 Identify components and controls of machines, including emergency stops and guards, and take appropriate action if not in working order in accordance with workplace procedures
  • 2.2 Accurately calculate and enter information required by machine for required process
  • 2.3 Clear work area of obstructions and potential hazards
  • 2.4 Identify and locate glass to be processed and check for imperfections and damage using appropriate handling techniques
3. Conduct processing operations
  • 3.1 Operate and monitor machines in accordance with manufacturer instructions and workplace procedures to ensure correct product quality and output
  • 3.2 Make required routine lubrication and adjustments of machines and/or equipment
  • 3.3 Identify problems occurring during work operations and report to appropriate persons in accordance with workplace procedures, and follow any authorised changes in working procedures
  • 3.4 Inspect completed product for quality of work and repair, reprocess or discard in accordance with workplace procedures.
4. Complete work
  • 4.1 Label processed glass and store in accordance with workplace procedures ensuring there are no projections
  • 4.2 Clean work area, safely dispose of rubbish and identify items for recycling in accordance with workplace procedures
  • 4.3 Remove and store tools, equipment and unused materials in accordance with workplace procedures
  • 4.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI487 MSFGG3005 Process glass by semi-automatic machines Unit of competency