Unit of competency Outline

Date retreived
22/07/2026 11:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Detect, record and collect evidence

Detect, record and collect evidence

Unit of competency
National Code
DEFEXO112
State Code
AVR74
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
26/10/2020
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
019903 - Forensic Science
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to detect, record and collect physical evidence resulting from an explosive incident. These activities can be conducted under a variety of conditions, including wartime, peacekeeping, training, in support of the civilian community/authority, as part of a joint services and/or coalition operation. The explosive incident may be an act of aggression or an accident.This unit was developed for personnel who are required to detect, record and collect physical evidence resulting from an explosive incident.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work individually and/or as part of a team, under indirect supervision. They would use discretion and judgement and take responsibility for the quality of their outputs, performing routine tasks in a range of contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Detect and record physical evidence
  • 1.1 Detect physical evidence using observation techniques and appropriate technological methods
  • 1.2 Detect latent evidence by physical or chemical means
  • 1.3 Record evidence prior to examination
  • 1.4 Document evidence using recording methods within resource limitations
2 Collect and package physical evidence
  • 2.1 Collect evidence to prevent contamination or loss
  • 2.2 Collect sufficient samples to allow for further examination/analysis, where possible
  • 2.3 Collect sufficient samples to represent the natural variation that occurs in the evidence
  • 2.4 Collect control reference samples where available and appropriate
  • 2.5 Package and store evidence to maintain custody of evidence and prevent degradation or contamination
No information
No information
No information