Unit of competency Outline

Date retreived
22/07/2026 11:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct non-destructive testing

Conduct non-destructive testing

Unit of competency
National Code
AURMTA007
State Code
AXB97
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to perform non-destructive testing on vehicle components and materials. It involves preparing for non-destructive testing, testing components and materials in order to determine component suitability and serviceability, and completing workplace processes.It applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for non-destructive testing
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Non-destructive testing information is sourced and interpreted
  • 1.3 Testing procedures are analysed, and those most appropriate for component material are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and testing equipment are selected and checked for serviceability, and inspection area is prepared for testing according to workplace procedures
2. Perform non-destructive testing activities
  • 2.1 Testing is carried out according to workplace procedures and safety requirements
  • 2.2 Test results are compared with component specifications and non-conformities and defects are identified as required
  • 2.3 Findings are documented according to workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF280 AURMTA3007 Conduct non-destructive testing Unit of competency