Elements and Performance Criteria

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Information includes:
diagrams or sketches
instructions issued by authorised organisational or external personnel
manufacturer specifications and instructions, where specified
material safety data sheets (MSDS)
memos
regulatory and legislative requirements pertaining to assembling/installing shopfront commercial entries bulkheads and component fittings
relevant Australian standards
safe work procedures relating to assembling/installing shopfront commercial entries bulkheads and component fittings
signage
verbal, written and graphical instructions
work bulletins
work schedules, plans and specifications.
Planning and preparation include:
assessment of conditions and hazards
determination of work requirements and safety plans and policies
equipment defect identification
work site inspection.
Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:
emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation
hazard control
hazardous materials and substances
organisational first aid
PPE prescribed under legislation, regulations and workplace policies and practices
safe operating procedures, including the conduct of operational risk assessment and treatments associated with:
concealed services (water, power and gas)
lighting
restricted access barriers
traffic control
work site visitors and the public
working at heights
working in confined spaces
working in proximity to others
use of firefighting equipment
use of tools and equipment
workplace environmental requirements and safety.
Tools and equipment include:
air compressor and hoses
brushes
building line
chalk line
clamps
hammers
levelling equipment
measuring tapes and rules
nail guns
plumb bob
power drills
power leads
sash cramps
screwdrivers
spirit levels
squares
step ladders
straight edge.
Quality requirements include:
assembling procedures
attention to specifications of work
control of handling procedures
protection of material surfaces
quality of materials
relevant regulations, including:
Australian standards
internal company quality policy and standards
manufacturer specifications where specified
workplace operations and procedures
use and maintenance of equipment
workplace operations and procedures.
Materials include:
aluminium
timber.
Environmental requirements include:
clean-up management
dust and noise
stormwater protection
waste management.
Statutory and regulatory authority includes:
federal, state and local authorities administering applicable Acts, regulations and codes of practice.

EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to prepare and assemble all components of a shopfront, providing evidence of the ability to:
comply with OHS regulations applicable to workplace operations
apply organisational quality procedures and processes within context of setting out and fabricating a shopfront
identify details and specifications of nominated shopfront to be set out
accurately apply tools and equipment to set out and mark location of frame material thickness and components
accurately apply measuring devices to read and record dimensions, plumb and level
identify inconsistencies in dimensions, plumb and level recorded for notification to appropriate personnel
identify and select prepared materials for components
display sound procedures for the safe and accurate preparation of each component for assembling
select and use appropriate processes, tools and equipment for assembling components
demonstrate safe and efficient use of tools and equipment
demonstrate sound techniques in the safe and efficient assembly of components to form framework for shopfront
display sound and accurate fitting of component fittings to locations
complete assembly free of scratches, dents and blemishes
safely and efficiently disassemble components and fittings and identify for delivery and assembling instructions
identify typical faults and problems that occur and action required to rectify them
communicate with others to ensure safe and effective workshop operations.
Context of and specific resources for assessment
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian standards' requirements.
Resource implications for assessment include:
workshop location with appropriate area
tools and equipment appropriate to required tasks
materials and prepared components for assembly processes
drawings, specifications and documentation relevant to activity.
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.
Method of assessment
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package
include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application
reinforce the integration of employability skills with workplace tasks and job roles
confirm a reasonable inference that competency is not only verified under the particular assessment circumstance, but is able to be transferred to other circumstances and environments.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.
Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.
Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.