Unit of competency Outline

Date retreived
22/07/2026 12:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Grind rails

Grind rails

Unit of competency
National Code
TLIW0004
State Code
OCY74
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
29/01/2021
View on TGA
State Implementation and Classification
Approved Date
01/04/2021
Field of Education
039907 - Rail Operations
Original Release Date
01/04/2021
Nominal Hours
18
Description
This unit involves the skills and knowledge required to grind rail and welds in accordance with rail network standards, safeworking and regulatory requirements, and workplace procedures.It includes determining job requirements, grinding weld and/or weld repair, grinding rail to repair surface defects, and completing all required documentation. This unit relates to the grinding of new welds and weld repairs, wheel burns, rail batter and overflow in plain track.People achieving competence in this unit will need to fulfil the applicable state/territory legislated rail safety requirements and to comply with relevant codes of practice and/or guidelines.Work is performed under some supervision, generally within a team environment. It involves the application of routine operational principles and procedures when grinding rail and welds, as part of workplace activities across a variety of operational contexts within the Australian rail system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 New welds and weld repairs are located
  • 1.2 Defects relating to wheel burns, rail battering and rail overflow are identified
  • 1.3 Hazards are identified, risks are assessed and control measures are implemented
  • 1.4 Appropriate equipment is selected
  • 1.5 Appropriate repair method and/or profile is selected to ensure completed work will meet specifications
  • 1.6 Site is cleared of obstructions and combustible material
2 Grind weld and/or weld repair
  • 2.1 Rail is ground to profile using approved equipment in accordance with workplace procedures
  • 2.2 Grinding equipment is operated safely in accordance with work health and safety (WHS)/occupational health and safety (OHS) and environmental requirements
  • 2.3 Rail gauge face is ground to match adjacent rail in curves in accordance with rail network standards and procedures
  • 2.4 Rail profile and vertical and horizontal alignment are measured to ensure compliance with rail network standards
  • 2.5 Rail surface condition is assessed for compliance with rail network standards
3 Grind rail to repair surface defects
  • 3.1 Rail is ground using approved equipment in accordance with workplace procedures
  • 3.2 Grinding equipment is operated safely in accordance with WHS/OHS and environmental requirements
  • 3.3 Finished surface is checked to ensure compliance with rail network specification
4 Complete documentation
  • 4.1 Required documentation procedures and processes are confirmed
  • 4.2 Documentation is filled in legibly and proofread
  • 4.3 Documentation is processed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AVH47 TLIW2012 Grind rails Unit of competency