Unit of competency Outline

Date retreived
22/07/2026 8:22 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diagnose and rectify faults in substation environment

Diagnose and rectify faults in substation environment

Unit of competency
National Code
UETTDRSB21
State Code
OBH09
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/09/2019
View on TGA
State Implementation and Classification
Approved Date
04/12/2019
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
04/12/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to diagnose and rectify faults in substation in the electricity supply industry (ESI).
It includes identifying and analysing fault conditions including isolating, repairing and restoring substation control circuits.
The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.
Other conditions may apply under State and Territory legislative and regulatory licensing requirement which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Plan for fault finding and rectification in power system substation environment
  • 1.1 Work schedules, construction plans, drawings, workplace procedures and material lists are obtained and analysed
  • 1.2 Job requirements and workplace procedures are identified and communicated with relevant personnel
  • 1.3 Hazards are identified, work health and safety (WHS)/occupational health and safety (OHS)risks assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
  • 1.4 Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
  • 1.5 Risk control measures are identified, prioritised, implemented and evaluated against the work schedule
  • 1.6 Equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
  • 1.7 Liaison and communication issues with authorised personnel, authorities, clients and land owners are resolved to facilitate work, as required
  • 1.8 Personnel participating in work are fully briefed and responsibilities confirmed in accordance with workplace procedures
  • 1.9 Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
2 Carry out fault finding within the substation environment
  • 2.1 WHS/OHS, sustainable energy and environmental principles and practices are monitored and actioned to reduce incidents of accidents in accordance with workplace procedures
  • 2.2 Cardiopulmonary resuscitation (CPR), rescue from live electrical apparatus and other related safety procedures are in place in accordance with job requirements and/or workplace procedures
  • 2.3 Safe working documentation is acquired and requirements completed in accordance with workplace procedures
  • 2.4 Requirements for lifting, climbing, working at heights, confined spaces and use of power tools/equipment are followed in accordance with workplace procedures
  • 2.5 Hazard warnings and safety signs are recognised and hazards and assessed WHS/OHS risks are reported to immediate authorised personnel for directions/preventative actions taken in accordance with workplace procedures
  • 2.6 Faults in power system substation are diagnosed and rectified to ensure completion in agreed timeframes, to quality standards and with minimum waste in accordance with workplace procedures
  • 2.7 Faults are located, identified and affected circuits isolated in accordance with the work schedules, job requirements and workplace procedures
  • 2.8 Faults in power system substation control circuits are rectified in an agreed timeframe and to workplace quality standards with a minimum of waste
  • 2.9 Unplanned events in the diagnosis and analysis of faults are responded to in accordance with workplace procedures
  • 2.10 Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills in accordance with requirements
  • 2.11 Circuit functions are restored in accordance with work schedules, job requirements and workplace procedures
  • 2.12 Quality checks of work are undertaken in accordance with industry standards and workplace procedures
3 Complete fault finding within the substation environment
  • 3.1 Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures
  • 3.2 Safe working documentation is surrendered, and equipment made ready for service in accordance with workplace procedures
  • 3.3 Worksite is cleaned and confirmed safe in accordance with workplace procedures
  • 3.4 Tools, equipment and surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with workplace procedures
  • 3.5 Work records, reports and/or documentation are completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WD731 UETTDRSB21A Diagnose and rectify faults in substation environment Unit of competency
Replaced By
State Code National Code Title Type
OED84 UETDRSB005 Diagnose and resolve faults in a substation environment Unit of competency