Use static machines for aluminium and unplasticised polyvinyl chloride (uPVC) fabrication

Unit of competency Outline

Date retreived
22/07/2026 9:49 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFGG3020

State Code
WI502

TGA Status
Deleted

DTWD Status
Transition (Deleted)

Current Release Number
1.00

Current Release Date
10/12/2013

View on TGA

State Implementation and Classification

Approved Date

19/06/2014

Field of Education

030717 - Plant And Machine Operations

Original Release Date

19/06/2014

Nominal Hours

Description

This unit of competency covers using a range of machines for fabrication of aluminium and uPVC extrusions and related materials.No licensing, legislative or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1 Identify static machines suitable for aluminium fabrication, their operation and safety requirements

1.1 Types of aluminium and uPVC fabrication static machines are identified, including their purpose and limitations
1.2 Applicable work health and safety (WHS), legislative and organisational requirements relevant to operation of static machines for aluminium and uPVC materials fabrication are verified and complied with
1.3 The method of operation for static machines is identified in accordance with manufacturer operating instructions

2 Prepare static machines for use

2.1 Fabrication requirements are determined from drawings and specifications in a logical machining order to suit the job, following workplace procedures
2.2 Necessary tools and equipment, including personal protective equipment, are selected and checked prior to use to ensure that they are appropriate for the fabrication process, serviceable and in a safe condition
2.3 Extrusions are measured and marked according to drawings and specifications
2.4 Machines are set up for the required operating process with fences and guides locked into position in accordance with manufacturer instructions

3 Operate machine

3.1 Machine start-up procedure is carried out and checked
3.2 Extrusions are handled carefully and masked, where necessary, to protect finishes from damage and fed to the machine in accordance with operating procedures
3.3 Extrusion is set up and held in place, where applicable, for mobile machinery and moving table operations
3.4 Machine is operated in accordance with its designed capacity, job requirements and manufacturer instructions with excess lubricant and cuttings cleaned from extrusions, tools and equipment regularly
3.5 Machine shutdown procedure is carried out in accordance with manufacturer instructions after completion of the job and checked for safety

4 Check machine and attachments for serviceability

4.1 Machine is monitored to determine operation is to performance standards, and any faults rectified and/or reported for further action
4.2 Replacement cutters and attachments are fitted and secured in accordance with manufacturer specifications

5 Complete machining operations

5.1 Tools, equipment and unused materials are cleaned, removed and stored appropriately
5.2 Waste and scrap material are removed for disposal or recycling, as required
5.3 Work area is cleaned and rubbish disposed of, as appropriate
5.4 Workplace documentation is completed, as required, according to workplace procedures

No information

Replaces

State Code	National Code	Title	Type
S7836	LMFGG3020A	Use static machines for aluminium and uPVC chloride fabrication	Unit of competency

State Code	National Code	Title	Type
J728	MSF20413	Certificate II in Glass and Glazing	Qualification
J732	MSF30413	Certificate III in Glass and Glazing	Qualification