Unit of competency Outline

Date retreived
23/07/2026 4:40 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair adhesive bonded structural damage on vehicles

Repair adhesive bonded structural damage on vehicles

Unit of competency
National Code
AURVTN023
State Code
AWZ71
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair bonded vehicle body panels and structures using an adhesive attachment method. It involves preparing for the task, selecting and using specialist tools and equipment, removing bonded structural damage, repairing panel sections, applying approved adhesives and realigning the structural repair, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair adhesive bonded structural damage
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Original equipment manufacturer (OEM) or authorised agency’s recommended bonding and repair procedures are accessed and interpreted
  • 1.3 Adhesive specifications and application instructions, including safety data sheets (SDS), and bonding materials are selected and prepared
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Adhesive application tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.6 Work is planned to identify adhesive bonding methods, minimise waste, and use time efficiently
2. Remove and replace bonded sections
  • 2.1 Replacement panels and components are checked against vehicle specifications and for quality
  • 2.2 Bonded panels and structures are removed according to OEM procedures and without causing damage to system or components
  • 2.3 Bonded panels and structures are repaired according to OEM procedures and stored until required
  • 2.4 Bonded panels and structures are refitted using approved bonding methods, adhesives, materials and equipment according to OEM or authorised agency specifications, and safety and environmental requirements
  • 2.5 Sealants are selected and applied according to OEM or authorised agency’s specifications and workplace procedures
  • 2.6 Bonded panels and structures are cleaned without causing damage to systems or components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and bonded vehicle panels and structures are presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF509 AURVTN3023 Remove and replace adhesive bonded panels and structures Unit of competency
Replaced By
State Code National Code Title Type
OCL76 AURVTN123 Repair adhesive bonded structural damage on vehicles Unit of competency