Unit of competency Outline

Date retreived
22/07/2026 10:42 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform rumping cuts

Perform rumping cuts

Unit of competency
National Code
MTMP3024C
State Code
D8924
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/07/2011
State Implementation and Classification
Approved Date
Field of Education
110105 - Butchery
Original Release Date
Nominal Hours
40
Description
This unit covers the skills and knowledge required to remove the hide from the rump area.
Notes
Elements and Performance Criteria
1. Pocket the rump
  • 1.1. Rump is pocketed to work instructions.
  • 1.2. Occupational Health and Safety (OH&S) requirements are identified and met.
  • 1.3. Hide is removed employing measures and techniques to avoid damage to hide or contamination of the carcase.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Contamination may include:
chain fallout
contents of intestines
dust
excreta
hair
water.
Communication skills may include:
listening and understanding
sharing information
speaking clearly and directly
working with diverse individuals and groups.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
Workplace requirements may include:
enterprise-specific requirements
hygiene and sanitation requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.

Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.

All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated at normal production speed.
Context of, and specific resources for assessment
Assessment must occur on a slaughter floor under normal operating conditions.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaces
State Code National Code Title Type
W6687 MTMP3024B Perform rumping cuts Unit of competency
Replaced By
State Code National Code Title Type
BAZ21 AMPA3026 Perform rumping cuts Unit of competency