Unit of competency Outline
Date retreived
22/07/2026 1:05 PM AWST
22/07/2026 1:05 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Cut by machine
Cut by machine
Unit of competency
National Code
LMTLG2001A
LMTLG2001A
State Code
W7380
W7380
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
17/10/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
17/10/2014
Nominal Hours
60
Description
This unit covers the skills and knowledge required to carry out the preparation activities, selection of materials and cutting of materials by machine to specifications and workplace standards.
Notes
Elements and Performance Criteria
1 Set up workstation
- 1.1 Workstation is set up in accordance with specifications and workplace procedures
- 1.2 Cutting equipment is prepared in accordance with manufacturer instructions
- 1.3 Tools and cutting equipment are selected as appropriate to job allocation, checked and appropriate action is taken in case of wear and tear, especially in relation to knives and boards
- 1.4 Records are kept
2 Assess materials
- 2.1 The material is correctly assessed against specification and best clicking approach is determined
- 2.2 Materials are laid-up correctly for single or upper multiple cutting
- 2.3 Work ticket is interpreted
- 2.4 Cut pieces are correctly sized, marked and counted using colour coding or workplace identification systems
- 2.5 Cut pieces are stamped according to work ticket and to workplace specifications
- 2.6 Materials are sorted according to colour and shade and other specifications
- 2.7 Materials are checked in relation to directional stretch and strength to determine best clicking approach
3 Operate machine
- 3.1 Machines are started up or closed down following enterprise operator procedures and relevant OHS practices
- 3.2 Cutting board is regularly cleaned, turned and maintained
- 3.3 Striker plate is regularly checked for distortion and damage and irregularities reported
- 3.4 Carry out minor machine maintenance
4 Cut materials
- 4.1 Clicking knives are selected according to job specifications and size requirements and used with safety and pressures on press are adjusted to knife sizes and shapes
- 4.2 Problems or faults with press, patterns, knives and cutting boards are recognised and referred for repair or correction
- 4.3 Work ticket specifications are followed according to pieces and pairs
- 4.4 Clicking knives and patterns are used to gain optimal material utilisation when compared against workplace standards
- 4.5 Faults are identified and patterns positioned accordingly
- 4.6 Parts are cut to workplace quality standards in relation to material flaws
- 4.7 Pieces are selected, colour or grain matched to workplace quality standards
- 4.8 Pieces, panels are cut to achieve best yield according to appropriate allowance
- 4.9 Distortions and defects on press cutting boards are identified and appropriate action taken
5 Check finished product
- 5.1 Check finished product against workplace quality standards
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Materials may include
suede
suede split
PU coated splits
PU coated non-woven fabrics
corrected grains
leather linings
leathers such as:
buffalo
cow
calf
kid
deer
kangaroo
fish
reptiles
emu
Machines may include
swing beam press
travelling head press
full beam press
automated presses
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Materials may include
suede
suede split
PU coated splits
PU coated non-woven fabrics
corrected grains
leather linings
leathers such as:
buffalo
cow
calf
kid
deer
kangaroo
fish
reptiles
emu
Machines may include
swing beam press
travelling head press
full beam press
automated presses
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
check work against work specification or workplace standards
prepare workstation and work prior to commencing operations
apply cutting techniques on pieces and pairs
apply workplace health and safety policies in work operations
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
check work against work specification or workplace standards
prepare workstation and work prior to commencing operations
apply cutting techniques on pieces and pairs
apply workplace health and safety policies in work operations
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV36 | MSTLG2001 | Cut by machine | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W375 | LMT30907 | Certificate III in Leather Production | Qualification |
| W363 | LMT21207 | Certificate II in Leather Production | Qualification |