Unit of competency Outline

Date retreived
23/07/2026 1:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate a non-slewing mobile crane of greater than three tonnes capacity

Operate a non-slewing mobile crane of greater than three tonnes capacity

Unit of competency
National Code
MEM11025
State Code
OAV47
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
04/09/2025
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
9
Description
This unit of competency defines the skills and knowledge required to operate non-slewing mobile cranes of greater than three tonnes capacity in a manufacturing environment. It applies to cranes commonly referred to as yard cranes which require the crane to be moved for positioning to lift and lower loads. The cranes covered by this unit incorporate a boom or jig and include mobile cranes on articulated and non-articulated vehicles and cranes mounted on self-propelled or locomotive drawn rail vehicles inside a large manufacturing enterprise.This unit is not recognised by regulators for licensing requirements. In order to satisfy licensing requirements, the imported unit TLILIC0040 Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) will be required.Where interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools, and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.Band: A
Unit Weight: 4
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Obtain requirement for load lifting and/or transfer according to procedures
2. Plan work
  • 2.1 Identify potential workplace hazards
  • 2.2 Identify hazard control measures consistent with appropriate standards to ensure the safety of personnel and equipment
  • 2.3 Identify and estimate the weight of the load in consultation with associated personnel
  • 2.4 Assess crane as appropriate to the load and workplace conditions
  • 2.5 Inspect and determine an appropriate path for the movement of loads in the work area
  • 2.6 Identify appropriate communication methods with associated personnel
3. Conduct routine checks
  • 3.1 Check crane visually for any damage or defects
  • 3.2 Access crane in a safe manner
  • 3.3 Ensure all signage and labels are visible and legible according to the appropriate standard
  • 3.4 Carry out routine pre-operational crane checks according to SOPs
  • 3.5 Locate and identify all controls
  • 3.6 Check crane service logbook for compliance
  • 3.7 Start crane according to SOPs and check for any abnormal noises
  • 3.8 Test all crane safety devices according to SOPs
  • 3.9 Carry out post-start operational checks according to SOPs
  • 3.10 Check all communication equipment for serviceability
  • 3.11 Report all damage and defects and record according to SOPs, and take appropriate action
4. Set up crane
  • 4.1 Check ground suitability
  • 4.2 Drive crane to the work area according to SOPs
  • 4.3 Position crane for work application and stability according to SOPs
  • 4.4 Determine appropriate crane configuration for work task according to SOPs
  • 4.5 Input boom or jib and counterweight configuration data into the crane computer, as applicable
  • 4.6 Apply appropriate hazard prevention or control measures to the work area according to SOPs
  • 4.7 Test communication equipment for functionality
5. Lift and transfer load
  • 5.1 Determine lifts within the capacity of the crane and environmental conditions
  • 5.2 Position boom or jib and hoist block over load following directions from associated personnel
  • 5.3 Carry out test lift according to SOPs
  • 5.4 Lift loads and, where required, transfer or mobile using all relevant crane movements according to SOPs and the appropriate standard
  • 5.5 Follow appropriate path where load is transferred or mobiled
  • 5.6 Interpret all required communication signals according to SOPs and the appropriate standard
  • 5.7 Monitor load movement constantly, ensuring safety to personnel and stability of load and crane
  • 5.8 Respond to unplanned and unsafe situations in line with SOPs
6. Shut down and secure crane
  • 6.1 Stow crane boom or jib and associated equipment and secure according to SOPs and the appropriate standard
  • 6.2 Apply relevant motion locks and brakes, where applicable
  • 6.3 Stow outriggers/stabilisers and secure according to SOPs, where applicable
  • 6.4 Shut down crane according to SOPs
  • 6.5 Carry out routine post-operational crane checks according to SOPs
  • 6.6 Stow plates or packing and secure, where applicable
  • 6.7 Record all damage and defects and report according to SOPs, and take appropriate action
No information
No information
Replaces
State Code National Code Title Type
D7533 MEM11025A Operate a non-slewing mobile crane of greater than three tonnes capacity Unit of competency