Unit of competency Outline

Date retreived
22/07/2026 5:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Form carbon anodes

Form carbon anodes

Unit of competency
National Code
PMASMELT260
State Code
AXM62
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
02/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to form carbon anodes as used in the aluminium smelting or similar process. This unit of competency applies to operators who are required to operate and monitor the carbon paste preparation and delivery equipment, carbon anode forming and cooling equipment and ancillary equipment; apply re-start, start-up and shutdown procedures; isolate and de-isolate plant; and recognise and respond to 'out-of-parameter' issues.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate. The operator would be part of a team during start-up and shutdown procedures. This unit of competency does not require the operation of a central control panel.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare for operations
  • 1.1 Interpret and confirm work requirements before proceeding
  • 1.2 Identify and control hazards
  • 1.3 Ensure appropriate authorisations have been obtained/issued
  • 1.4 Identify work flow path (interruptions or bottlenecks) blockage
2 Conduct pre-start requirements to procedures
  • 2.1 Conduct routine pre-start equipment checks
  • 2.2 Conduct isolation as appropriate for pre-start inspections
  • 2.3 Prepare equipment for operation
  • 2.4 Complete routine equipment checklists
  • 2.5 Complete reports as required for equipment inspections
3 Conduct operations to procedures
  • 3.1 Start up carbon anode forming equipment
  • 3.2 Monitor equipment operation and check operational variables are within parameters
  • 3.3 Verify equipment performance throughout the process
  • 3.4 Adjust equipment/variables in accordance with procedures
  • 3.5 Apply operating principles to resolve problems and take action
  • 3.6 Shut down carbon anode forming equipment as required
  • 3.7 Conduct routine housekeeping activities
  • 3.8 Recognise and respond to emergencies should one arise
  • 3.9 Complete records as required for equipment operation and performance
4 Isolate and de-isolate plant
  • 4.1 Isolate plant
  • 4.2 Make safe for required work
  • 4.3 Check plant is ready to be returned to service
  • 4.4 De-isolate and prepare plant for return to service
No information
No information
Replaces
State Code National Code Title Type
W8908 PMASMELT260B Form carbon anodes Unit of competency