Unit of competency Outline

Date retreived
23/07/2026 11:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Collect and log motorsport data

Collect and log motorsport data

Unit of competency
National Code
AURM340312B
State Code
D7601
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
010103 - Statistics
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to collect and log motorsport data. It requires the ability to identify the data, prepare collection methods and systems, and use technical skills to collect and evaluate data.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify situations where motorsport data is required
  • 1.1. Clarify purpose of data collection
  • 1.2. Clarify sources of data
  • 1.3. Use team instructions and procedures to specify data requirements
  • 1.4. Clarify end users of motorsport data
  • 1.5. Interpret controlling body rules, category rules and supplementary regulations
  • 1.6. Observe occupational health and safety (OHS) requirements, including regulatory requirements and personal protection needs, throughout the work
2. Prepare resources for data collection
  • 2.1. Develop checklists/recording sheets according to team specifications
  • 2.2. Prepare manual instruments for data collection
  • 2.3. Check electronic data acquisition system settings
  • 2.4. Check and adjust equipment settings, calibration and system in accordance with task requirements and equipment manufacturer instructions
  • 2.5. Conduct trial runs to check equipment and procedures for function, accuracy and efficiency
  • 2.6. Make necessary adjustments to equipment or procedures
3. Collect data
  • 3.1. Carry out data acquisition system start-up procedure in accordance with manufacturer instructions
  • 3.2. Operate data acquisition system in accordance with its designed capacity and purpose and to manufacturer recommendations
  • 3.3. Estimate and describe potential for inaccurate results arising from variables
  • 3.4. Collect data using manual and electronic methods
  • 3.5. Check data for accuracy
  • 3.6. Report problems with the required data or the operation of the equipment to appropriate persons
4. Log data
  • 4.1. Import selected data into data analysis software
  • 4.2. Evaluate data for preliminary indication of non-conformity and trends or patterns
  • 4.3. Collate findings from data and report to appropriate persons
  • 4.4. Store data for later retrieval in accordance with team procedures
5. Maintain data acquisition equipment
  • 5.1. Clean, maintain and prepare equipment and support material ready for further use and store in accordance with manufacturer specifications and team requirements
  • 5.2. Conduct systems check
  • 5.3. Tag unserviceable equipment and document faults in accordance with team procedures
  • 5.4. Complete operator maintenance in accordance with manufacturer specifications and team procedures
No information
No information
Replaces
State Code National Code Title Type
W2889 AURM340312A Collect and log motorsport data Unit of competency
Replaced By
State Code National Code Title Type
WF281 AURMTA3009 Collect and log motorsport data Unit of competency
State Code National Code Title Type
D543 AUR30911 Certificate III in Motorsport Qualification