Unit of competency Outline

Date retreived
23/07/2026 11:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test and service 240V portable generators

Test and service 240V portable generators

Unit of competency
National Code
AURP322776B
State Code
D7641
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/10/2011
Nominal Hours
8
Description
This unit of competency describes the skills and knowledge required to carry out load testing and servicing of portable power generators rated at 240V output.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to undertake load test
  • 1.1. Confirm nature and scope of work requirements
  • 1.2. Identify and source procedures, information and tooling required
  • 1.3. Analyse method options, select those most appropriate to the circumstances and make preparations
  • 1.4. Source technical and/or calibration requirements for load testing and prepare support equipment
2. Conduct test and analyse results
  • 2.1. Observe occupational health and safety (OHS) requirements, including individual state/territory regulatory requirements and personal protection needs, throughout the work
  • 2.2. Observe warnings in relation to working with 240V
  • 2.3. Carry out load test in accordance with workplace procedures and manufacturer/component supplier specifications
  • 2.4. Compare test results with specifications to indicate compliance or non-compliance
  • 2.5. Document results with evidence and supporting information and make recommendations
  • 2.6. Forward report to persons for action in accordance with workplace procedures
3. Prepare for service operation
  • 3.1. Confirm work to be carried out
  • 3.2. Access and interpret service procedures, workshop manuals and manufacturer's information
  • 3.3. Identify and prepare tools, equipment and materials required for servicing job
  • 3.4. Set up work area
4. Service generator
  • 4.1. Identify and observe applicable OHS requirements, including state/territory regulatory requirements and personal protection needs
  • 4.2. Select tooling and equipment to meet job requirements and check to ensure they are in good working order
  • 4.3. Service generator following manufacturer/component supplier recommended procedures and specifications
5. Complete work and return unit to customer
  • 5.1. Complete service schedule documentation and update customer and warranty information as required
  • 5.2. Inspect serviced unit to ensure protective guards, cowlings and safety features are in place
  • 5.3. Clean unit to workplace expectations
  • 5.4. Clean work area, dispose of waste and store tools and equipment in accordance with workplace procedures
  • 5.5. Provide customer report on service and explain use and care of equipment and warranty requirements
No information
No information
Replaces
State Code National Code Title Type
W2925 AURP322776A Test and service 240V portable generators Unit of competency
Replaced By
State Code National Code Title Type
WF308 AURPTR3001 Test and service 240V portable generators Unit of competency