Unit of competency Outline

Date retreived
24/07/2026 5:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Convert timber

Convert timber

Unit of competency
National Code
FWPTMM3201
State Code
AXJ72
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to prepare and re-saw material to width and on the thickness with a power driven saw to optimise timber conversion and usability. Work includes non-specialist saw maintenance and is completed in a forest and wood products factory setting.The unit applies to Sawyer, Saw Operator, Machine Operator, Timber Products Technician. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for conversion
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Obtain type and quantity of material to be converted from storage location.
  • 1.3 Select appropriate equipment and check for operational effectiveness in line with manufacturer's recommendations.
  • 1.4 Plan timber conversion and saw set-up in line with work plan.
2. Produce boards
  • 2.1 Set and regularly check saw, carriage and feed and adjust to suit conversion plan, ordered sizes and tolerances.
  • 2.2 Use equipment and machinery in line with organisational procedures, manufacturer's instructions and environmental protection practices.
  • 2.3 Monitor timber supply to ensure constant supply to saw.
  • 2.4 Maintain feed rate and operate saw bench to produce boards without damage to boards or saw blade.
  • 2.5 Dispose of incorrect cuts, off-cuts and material with defects in line with environmental protection practices.
  • 2.6 Stack material safely in designated location in line with work order requirements.
  • 2.7 Report processing and equipment faults to appropriate personnel.
3. Complete operator maintenance
  • 3.1 Follow organisational safety procedures to lock-out equipment.
  • 3.2 Check saw blades for bluntness or damage.
  • 3.3 Remove and replace saw blades in line with manufacturer's recommendations.
  • 3.4 Dispose of used blades in line with organisational procedures and environmental protection practices.
  • 3.5 Keep saw area clear of dust, off-cuts and debris in line with WHS and site requirements.
No information
No information
Replaces
State Code National Code Title Type
D6092 FPITMM3201B Convert timber Unit of competency
Replaced By
State Code National Code Title Type
OBM02 FWPTMM3210 Convert timber Unit of competency
State Code National Code Title Type
BAM0 FWP30516 Certificate III in Timber Manufactured Products Qualification
BAM2 FWP30816 Certificate III in Woodmachining Qualification