Unit of competency Outline

Date retreived
23/07/2026 5:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform an aerobatic sequence

Perform an aerobatic sequence

Unit of competency
National Code
AVIY0015
State Code
AWO94
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
031505 - Aircraft Operation
Original Release Date
16/08/2016
Nominal Hours
55
Description
This unit involves the skills and knowledge required to perform an aerobatic sequence, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes designing an aerobatic sequence, and performing aerobatic sequences above a specified safety height.This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew, and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.
Notes
Elements and Performance Criteria
1 Design an aerobatic sequence
  • 1.1 Performance parameters are identified based on physical limitations of pilot and structural limitations of aircraft
  • 1.2 Sequence of aerobatic manoeuvres is designed that meets a specified requirement
  • 1.3 Practical transitions are included between aerobatic manoeuvres
  • 1.4 Performance parameters are identified based on a combination of aircraft attitude, power setting, altitude and speed that provide go-no-go guidance for safe completion of all manoeuvres above safety height
2 Perform aerobatic sequences above specified safety height
  • 2.1 Specified sequences of manoeuvres are completed in accordance with aerobatics design
  • 2.2 Performance parameters required for safe completion of a manoeuvre are achieved prior to commencement
  • 2.3 Orientation with display axis is maintained
  • 2.4 Energy potential of aircraft is managed to ensure completion of manoeuvres and sequences of manoeuvres within aircraft structure and minimum height limits
  • 2.5 Failure to achieve performance parameters (energy requirement) to complete a manoeuvre is recognised and aircraft is managed to regain control above safety height
  • 2.6 Height at or above a specified altitude is maintained
No information
No information
Replaces
State Code National Code Title Type
WB867 AVIY4062A Perform an aerobatic sequence Unit of competency
State Code National Code Title Type
AD462 AVISS00031 Aerobatic Pilot Skill Set Skill set