Unit of competency Outline

Date retreived
23/07/2026 9:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply trowelled texture coat finishes

Apply trowelled texture coat finishes

Unit of competency
National Code
CPCCSP3003
State Code
OCP67
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040317 - Plastering
Original Release Date
01/06/2021
Nominal Hours
80
Description
This unit specifies the skills and knowledge required to mix and apply trowelled texture coat finishes. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them, without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to apply trowelled texture coat finishes.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and use personal protective equipment (PPE) for each stage of the task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Prepare surface and mix and apply texture coat.
  • 2.1 Prepare substrate for the specified trowelled texture coat finish.
  • 2.2 Mix texture coating materials to designed proportion and consistency.
  • 2.3 Apply texture coat with trowel to a uniform finish to Australian Standards. with specified thickness.
3 Finish and cure texture coat
  • 3.1 Finish texture coat plumb and level.
  • 3.2 Cure texture coat to weather and/or temperature conditions.
4 Clean up.
  • 4.1 Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
  • 4.2 Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.
No information
No information
Replaces
State Code National Code Title Type
W9546 CPCCSP3003A Apply trowelled texture coat finishes Unit of competency