Install and test ducting systems

Unit of competency Outline

Date retreived
23/07/2026 6:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
CPCPMS3035

State Code
OCN61

TGA Status
Current

DTWD Status
Approved

Current Release Number
2.00

Current Release Date
23/12/2020

View on TGA

State Implementation and Classification

Approved Date

01/06/2021

Field of Education

031315 - Refrigeration And Air Conditioning Mechanics

Original Release Date

01/06/2021

Nominal Hours

Description

This unit specifies the skills and knowledge required to install and test ducting systems used for ventilation systems, heating and/or cooling systems, and exhaust systems. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.

Notes

Elements and Performance Criteria

1 Identify installation requirements.

1.1 Access, read and determine install and test ducting systems installation requirements from job specifications, relevant Australian Standards, codes, manufacturer’s specifications and jurisdictional requirements.
1.2 Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements.

2 Prepare for work.

2.1 Create a materials list and collect materials.
2.2 Select and check serviceability of appropriate tools, equipment and personal protective equipment (PPE).

3 Install and insulate duct system.

3.1 Set out system to comply with plans and specifications.
3.2 Position duct supports and fixings to comply with plans, job requirements and manufacturer's specifications.
3.3 Install duct work in accordance with plans and specifications.
3.4 Assemble and seal joints in accordance with plans and manufacturer's specifications.
3.5 Install duct system in specified location without damage or distortion to surrounding environment or other services and in accordance with relevant standards.
3.6 Install insulation materials in specified location without damage or distortion to surrounding environment or other services and in accordance with relevant standards.
3.7 Install diffusers and terminal devices in accordance with plans and specifications and job requirements.

4 Test duct work.

4.1 Determine test requirements from plans and specifications.
4.2 Select and test duct work under pressure in accordance with instructions and workplace procedures.
4.3 Identify and repair leaks using specified procedures and materials to ensure correct flow operation.
4.4 Complete documentation according to relevant regulatory requirements and or workplace requirements.

5 Clean up.

5.1 Clear the work area, and dispose of, reuse or recycle materials in accordance with state and territory legislation and workplace policies and procedures.
5.2 Clean tools and equipment, check for serviceability and report any damage, and store and secure according to workplace procedures.

No information

Replaces

State Code	National Code	Title	Type
WF918	CPCPMS3035A	Install and test ducting systems	Unit of competency

State Code	National Code	Title	Type
BGC2	CPC32420	Certificate III in Plumbing	Qualification