Unit of competency Outline

Date retreived
23/07/2026 6:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Splice and connect timber members

Splice and connect timber members

Unit of competency
National Code
RIICTB306D
State Code
WH170
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to splice and connect timber members in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to spice and connect timber members
  • 1.1 Access, interpret and apply splice and connect timber members documentation and ensure the work activity is compliant
  • 1.2. Obtain, read, interpret, clarify and confirm work requirements
  • 1.3. Select and wear correct personal protective equipment appropriate for work activities
  • 1.4. Identify, address and report hazards, risks and environmental issues and implement control measures
  • 1.5. Confirm and apply environmental protection and safety requirements
  • 1.6. Obtain, interpret and implement traffic management signage requirements
  • 1.7. Select and check for faults plant, tools and equipment to carry out tasks
  • 1.8. Identify, confirm, safely handle and locate, ready for use, materials required for the work application
  • 1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Install temporary supports
  • 2.1. Locate and level bed logs in place
  • 2.2. Install temporary header
  • 2.3. Position toms and jacks on the bed logs
  • 2.4. Install temporary bracing
  • 2.5. Loosen or cut connectors to piles to allow movement and access
  • 2.6.Jack bridge structure clear of pile
3. Splice and connect
  • 3.1. Select and measure timber components
  • 3.2. Face timber members in readiness for joining
  • 3.3. Apply durability treatments to the members
  • 3.4. Apply preservatives to the faced sections
  • 3.5. Fit splicing plate
  • 3.6. Install connectors to the members
  • 3.7. Remove temporary supports after members are secured in place
4. Clean up
  • 4.1. Clear work area and dispose of or recycle materials
  • 4.2. Clean, check, maintain and store machinery, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCY39 RIICTB306E Splice and connect timber members Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification