Unit of competency Outline

Date retreived
23/07/2026 6:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and refit motorcycle wheel and tyre assemblies

Remove and refit motorcycle wheel and tyre assemblies

Unit of competency
National Code
AURJTJ003
State Code
AXC96
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to remove and refit wheel and tyre assemblies fitted to motorcycles. It involves preparing for the work, removing and refitting the wheel and tyre assembly, and completing the workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry.The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove wheel and tyre assembly
  • 1.1 Environmental and safety requirements are sourced and interpreted
  • 1.2 Task instruction is interpreted and wheel and tyre assembly to be worked on is identified
  • 1.3 Manufacturer specifications for removing and replacing wheel and tyre assembly are sourced and interpreted
  • 1.4 Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • 1.5 Tools and equipment required for removing and replacing wheel and tyre assembly are identified and checked for serviceability
2. Remove wheel and tyre assembly
  • 2.1 Motorcycle is prepared for wheel removal according to workplace procedures and safety requirements
  • 2.2 Wheel and tyre assembly is removed according to workplace procedures and manufacturer specifications, and without causing damage to components, tools or equipment
  • 2.3 Wheel and tyre assembly is identified according to manufacturer specifications
3. Refit wheel and tyre assembly
  • 3.1 Wheel and tyre assembly is prepared for replacement
  • 3.2 Wheel and tyre assembly is replaced according to workplace procedures, manufacturer specifications and safety requirements, and without causing damage to components, tools or equipment
  • 3.3 Wheel and tyre assembly on motorcycle is checked for correct operation
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and motorcycle is presented ready for use
  • 4.2 and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
No information