Unit of competency Outline

Date retreived
23/07/2026 5:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain train detection equipment

Install and maintain train detection equipment

Unit of competency
National Code
UEERS0013
State Code
OBX76
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to install/maintain train detection equipment in a rail network.It includes preparing and installing/maintaining train detection equipment. It also includes completing the installation/maintenance of train detection equipment and repairing faults, performing operational tests and reporting requirements.Persons achieving competence in this unit will need to fulfil the applicable state/territory legislated rail safety requirements and comply with relevant codes of practice, rules and/or guidelines.No other licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to install/maintain train detection equipment
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified
  • 1.2 Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures implemented in preparation for work
  • 1.3 Scope of the installation/maintenance is determined from maintenance schedules, job specifications, drawings and regulatory requirements
  • 1.4 Appropriate rail safe working person/s is consulted to ensure work is coordinated effectively with others involved on the worksite
  • 1.5 Materials needed for the installation/maintenance work are obtained in accordance with workplace procedures and checked against job specifications
  • 1.6 Tools, equipment and testing devices needed for installation/maintenance work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Install/maintain train detection equipment
  • 2.1 WHS/OHS risk control measures and workplace procedures for carrying out work are followed
  • 2.2 Installation/maintenance work is carried out in accordance with manufacturer specifications and workplace procedures
  • 2.3 Normal function and operating parameters are confirmed in accordance with appropriate manuals, job specifications and commissioning data
  • 2.4 Fault-finding and diagnostic techniques are used to verify system/faults
  • 2.5 Faulty, damaged or insecure components are replaced/repaired or secured in accordance with manufacturer specifications and workplace procedures
  • 2.6 Installation/maintenance, adjusting and testing work is carried out efficiently, without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
  • 2.7 Appropriate readings are measured and recorded using relevant test instruments
  • 2.8 Equipment is tested and adjusted in accordance with manufacturer specifications, workplace and equipment operating procedures
  • 2.9 Equipment operational inspections and tests are completed in accordance with job specifications and workplace procedures
  • 2.10 Methods for dealing with unplanned situations are determined on the basis of safety and specified work outcomes
3 Complete train detection equipment installation/maintenance
  • 3.1 WHS/OHS risk control work completion measures and workplace procedures are followed
  • 3.2 Calibration of equipment is verified and equipment is confirmed by functional tests in accordance with workplace and equipment operating procedures
  • 3.3 Work completion is documented and appropriate rail safe working person/s notified in accordance with workplace procedures and relevant reports produced
No information
No information
Replaces
State Code National Code Title Type
WC731 UEENEEN109A Install and maintain train detection equipment Unit of competency
Replaced By
State Code National Code Title Type
OFD91 UEERS0033 Maintain train detection equipment Unit of competency
State Code National Code Title Type
BFO2 UEE41220 Certificate IV in Electrical - Rail Signalling Qualification