Unit of competency Outline

Date retreived
23/07/2026 2:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain basic avionic systems and components

Maintain basic avionic systems and components

Unit of competency
National Code
MEA297
State Code
OAC97
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/08/2018
View on TGA
State Implementation and Classification
Approved Date
04/01/2019
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
04/01/2019
Nominal Hours
60
Description
This unit of competency describes the skills and knowledge required to maintain basic avionic systems and components. It involves inspecting, testing and troubleshooting systems; and removing and installing components. The unit requires the application of hand skills and the use of maintenance documentation and publications. Work may be performed individually or as part of a team.The unit applies to the scheduled and unscheduled maintenance of basic fixed wing and rotary wing aircraft where the avionic systems are limited to very high frequency (VHF) communications, basic audio systems, automatic direction finding (ADF) and very high frequency omni-range (VOR) radio navigation systems, stand-alone global navigation systems (GNS), air traffic control (ATC) transponders, and automatic dependent surveillance-broadcast (ADS-B).This unit forms part of the Civil Aviation Safety Authority (CASA) requirement for maintenance certification licences under Civil Aviation Safety Regulation (CASR) Part 66. Where a CASA licensing outcome is sought, users must refer to the licensing provisions in the MEA Aeroskills Companion Volume Implementation Guide.
Notes
Elements and Performance Criteria
1. Inspect basic aircraft avionic systems and components
  • 1.1 Use maintenance documentation and modification status, including system defect reports where relevant, to identify specific inspection requirements
  • 1.2 Check isolation tags and configure aircraft for safe system inspection and operation according to applicable maintenance manual
  • 1.3 Visually or physically check avionic systems for external signs of defects according to applicable maintenance manual and work health and safety (WHS) requirements
  • 1.4 Correctly identify and report defects
2. Test and adjust basic aircraft avionic systems
  • 2.1 Prepare aircraft and systems according to applicable maintenance manual for the application of power/system operation
  • 2.2 Functionally test avionic systems for evidence of serviceability or malfunction according to maintenance manual
  • 2.3 Calibrate or adjust system according to maintenance manual and as appropriate
3. Troubleshoot basic aircraft avionic systems
  • 3.1 Use available information from maintenance documentation and inspection and test results, where necessary, to assist in fault determination
  • 3.2 Use maintenance manual fault diagnosis guides and logic processes to ensure efficient and accurate troubleshooting using test sets, maintenance data, and fault-finding charts or similar, to line replacement level
  • 3.3 Obtain specialist advice where required to assist with the troubleshooting process
  • 3.4 Locate system faults and clearly identify and correctly record their causes in maintenance documentation where required and according to standard organisational procedures
  • 3.5 Determine rectification requirements
4. Remove and install basic aircraft avionic system components
  • 4.1 Render system safe and prepared according to applicable maintenance manual and fit isolation tags where necessary to ensure personnel safety
  • 4.2 Remove avionic component according to applicable maintenance manual while observing WHS requirements
  • 4.3 Complete and process required maintenance documentation according to standard organisational procedures
  • 4.4 Tag and package removed components according to specified procedures
  • 4.5 Check avionic components to be installed to confirm correct part numbers, modification status, serviceability, and shelf life
  • 4.6 Perform physical installation of avionic components according to applicable maintenance manual
  • 4.7 Reinstate system to correct operational condition in preparation for testing and calibration or adjustment, as necessary
  • 4.8 Complete and process required maintenance documentation according to standard organisational procedures
No information
No information
Replaces
State Code National Code Title Type
AUE05 MEA289 Maintain basic light aircraft avionic systems and components Unit of competency