Unit of competency Outline

Date retreived
22/07/2026 8:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

File and set saws

File and set saws

Unit of competency
National Code
FWPSAW3210
State Code
AXK00
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
21/02/2018
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030715 - Precision Metalworking
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to position blades in jigs or vices, produce bevels along the back clearance angles of teeth, check blade clearance requirements and set teeth to site requirements. Work is completed in a forest products factory setting.The unit applies to Sawdoctor, Saw Repairer, Sawyer.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for filing and saw setting
  • 1.1 Review work order and, where required, check with appropriate personnel.
  • 1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness in line with manufacturer's recommendations.
  • 1.3 Plan setting process in line with work order.
  • 1.4 Follow organisational safety procedures throughout all maintenance and repair processes.
2. Set saw
  • 2.1 Set up saw in selected jig to enable setting work.
  • 2.2 Check kerf and finish requirements to suit machine horsepower, saw type and cutting conditions.
  • 2.3 Examine individual teeth to check amount of setting required.
  • 2.4 Maintain welding condition, saw temper and consistency of set between alternate teeth.
  • 2.5 Measure and assess teeth for correct setting.
  • 2.6 Bevel teeth and assess bevel length.
  • 2.7 Apply set to teeth and allow for estimated spring back.
  • 2.8 Check set to teeth using gauges in line with organisational procedures.
  • 2.9 Identify routine processing and equipment faults and resolve or report to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6066 FPISAW3210B File and set saws Unit of competency
Replaced By
State Code National Code Title Type
OBM25 FWPSAW3234 File and set saw blades for hand saws and circular saws Unit of competency