Unit of competency Outline

Date retreived
23/07/2026 2:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service bicycle wheels and hubs

Service bicycle wheels and hubs

Unit of competency
National Code
AURBTJ102
State Code
OCK40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to service bicycle wheels and hubs. The unit involves preparing for the work, selecting and using specialist tools and equipment, inspecting, removing, adjusting and refitting the bicycle wheels and hubs, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service bicycle wheels and hubs
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Research and interpret bicycle manufacturer specifications and service instructions for wheels and hubs
  • 1.3 Inspect condition of bicycle wheels and hubs for faults and worn or damaged components using visual inspection methods and comparison of measurements against manufacturer specifications
  • 1.4 Identify hazards associated with the work and manage risks
  • 1.5 Select and check tools and equipment for serviceability
  • 1.6 Prepare work area and plan work to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of wheels and hubs
  • 2.1 Remove bicycle wheels according to workplace procedures and manufacturer specifications
  • 2.2 Service wheels and hubs according to work plan, manufacturer specifications, and safety and environmental requirements
  • 2.3 Refit serviced wheels and hubs to bicycle and test and adjust as required according to job requirements and workplace procedures
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
  • 3.2 Report problems outside own area of responsibility to required person
  • 3.3 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.4 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE41 AURBTJ002 Service bicycle wheels and hubs Unit of competency