Unit of competency Outline

Date retreived
23/07/2026 6:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service bicycle hydraulic braking systems

Service bicycle hydraulic braking systems

Unit of competency
National Code
AURBTB002
State Code
AXE48
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to service bicycle hydraulic braking systems. It involves preparing for the work, selecting and using specialist tools and equipment, planning, servicing and testing the bicycle braking system, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service bicycle hydraulic braking system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted
  • 1.3 Condition of bicycle hydraulic braking system is inspected, using visual and physical methods and compared with manufacturer specifications
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of braking system
  • 2.1 Hydraulic braking system is serviced according to work plan and safety and environmental requirements
  • 2.2 Hydraulic braking system specifications are checked according to workplace procedures
  • 2.3 Operation of serviced braking system is tested through its full range and adjustments are made as required
  • 2.4 Results and quality issues are reported to authorised personnel as required
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF049 AURBTB2002 Service bicycle hydraulic braking systems Unit of competency