Unit of competency Outline

Date retreived
23/07/2026 9:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design signal-conditioning sub-systems

Design signal-conditioning sub-systems

Unit of competency
National Code
UEEEC0014
State Code
OBZ53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
72
Description
This unit involves the skills and knowledge required to design signal-conditioning sub-systems incorporating digital and analogue elements.It includes following design brief, applying knowledge of digital and analogue devices, interpreting device specifications, constructing prototypes, testing developed system prototype operation, and documenting design and development work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify design signal-conditioning sub-system requirements
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are obtained and applied
  • 1.2 Hazards are identified, WHS/OHS risks are assessed, control measures and workplace procedures are implemented in preparation for work
  • 1.3 Scope of proposed signal-conditioning sub-system is determined from design brief in consultation with appropriate person/s
  • 1.4 Design signal-conditioning sub-systems development work is planned to meet scheduled timelines in consultation with person/s involved on the worksite
  • 1.5 Materials and devices/components required for work are determined on compatibility of their specifications with data acquisition system requirements and project budget constraints
2 Design signal-conditioning sub-system
  • 2.1 WHS/OHS risk control work measures and workplace procedures are followed
  • 2.2 Digital and analogue device elements used in signal-conditioning sub-systems and relevant industry standards are applied to the design specification
  • 2.3 Alternative design/s are considered based on the design brief
  • 2.4 Safety, functional and budget considerations are incorporated in the design specification
  • 2.5 Prototype devices and circuits are constructed, programmed and tested for compliance with design brief and regulatory requirements
  • 2.6 Prototype faults are rectified and retested to ensure effective operation of design
  • 2.7 Design specifications are documented for submission to appropriate person/s for approval
  • 2.8 Solutions to unplanned situations are implemented in accordance with workplace policy
3 Obtain design approval for signal-conditioning sub-system
  • 3.1 Signal-conditioning sub-system design is presented and explained to client representative and/or relevant person/s
  • 3.2 Modifications to design are negotiated with relevant person/s within the constraints of workplace policy, as required
  • 3.3 Final sub-system design is documented and approval obtained from appropriate person/s
  • 3.4 Quality of work is monitored against performance agreement and/or workplace or industry standards
No information
No information
Replaces
State Code National Code Title Type
WC610 UEENEEH185A Design signal-conditioning subsystems Unit of competency