Unit of competency Outline
Date retreived
23/07/2026 11:32 AM AWST
23/07/2026 11:32 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform machinery maintenance
Perform machinery maintenance
Unit of competency
National Code
AHCMOM302
AHCMOM302
State Code
BAR30
BAR30
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
030717 - Plant And Machine Operations
Original Release Date
12/01/2017
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to prepare, inspect, maintain and record maintenance requirements for machinery that is used principally in agriculture, horticulture, and conservation and land management work.The unit applies to individuals who conduct machinery maintenance under broad direction, and take responsibility for their own work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to maintain equipment
- 1.1 Determine job requirements from workplace instructions
- 1.2 Source and interpret machinery and equipment operation and maintenance manual servicing information
- 1.3 Select suitable and safe work site for maintenance activities
- 1.4 Identify workplace hazards, assess risks and implement risk controls
- 1.5 Select and check for serviceability tools, equipment and materials according to operation and maintenance manual
- 1.6 Fit, use and maintain personal protective equipment according to job requirements and operation and maintenance manual
2. Inspect engine and components
- 2.1 Carry out regular engine and component checks on machinery and equipment
- 2.2 Lubricate all relevant grease or lubricant points
- 2.3 Change oils and filters at intervals prescribed in operation and maintenance manual
- 2.4 Check hydraulic hoses and systems for deterioration and rectify defects according to operation and maintenance manual
3. Inspect transmission
- 3.1 Check drive and steering clutches for operation and adjust where applicable according to operation and maintenance manual
- 3.2 Check transmission oil levels
- 3.3 Check tracks or wheels and undercarriage for oil leaks and wear
- 3.4 Identify faulty seals or leaks and take corrective actions according to operation and maintenance manual
- 3.5 Clean machinery according to workplace requirements
4. Maintain components and attachments
- 4.1 Check components for wear and condition
- 4.2 Replace worn or unserviceable components according to operator and maintenance manual
- 4.3 Complete component inspection and replacement activities in line with workplace procedures
- 4.4 Check moving operational components for wear and condition and adjust to the tolerances specified in operator and maintenance manual
- 4.5 Clean and maintain work areas and return to operating condition
- 4.6 Collect, treat and dispose or recycle waste from maintenance activities according to workplace procedures
5.Record maintenance
- 5.1 Record identified faults and defects in machine record
- 5.2 Record maintenance procedures in workshop record in line with workplace procedures
- 5.3 Report service or repair requirements to management
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D7016 | AHCMOM302A | Perform machinery maintenance | Unit of competency |