Unit of competency Outline

Date retreived
22/07/2026 11:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Provide solutions to pneumatic-hydraulic system operations

Provide solutions to pneumatic-hydraulic system operations

Unit of competency
National Code
UEEIC0027
State Code
OCA40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
72
Description
This unit involves the skills and knowledge required to provide solutions to pneumatic-hydraulic system operations.It includes identifying, providing, completing and documenting solutions to discovered problems in pneumatic-hydraulic system operations. It also includes setting up and maintaining pneumatic and hydraulic systems; applying problem-solving procedures, including using measuring instruments; applying appropriate circuit theorems; and providing solutions derived from measurements and calculations and justification for such solutions.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify pneumatic-hydraulic system operations
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures are identified and applied
  • 1.2 Hazards are identified, risks are assessed and control measures implemented
  • 1.3 System problems are identified from documentation and consultation with supervisor to determine scope of work
  • 1.4 Advice is sought from supervisor to ensure work is coordinated effectively with others
  • 1.5 Sources of materials required for work are identified in accordance with workplace procedures
  • 1.6 Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
2 Provide solution to pneumatic-hydraulic operation system
  • 2.1 WHS/OHS risk control work measures and procedures are followed
  • 2.2 Need to test or measure live work systems is determined in accordance with workplace procedures
  • 2.3 Systems are checked and isolated in accordance with workplace procedures
  • 2.4 Pneumatic-hydraulic system problems are solved using measured and calculated values
  • 2.5 Unplanned situations are responded to in accordance with workplace procedures and approval of authorised person/s in a manner that minimises risk to personnel and equipment
  • 2.6 Problems are solved using sustainable energy principles without waste of materials, damage to apparatus circuits, the surrounding environment or services in accordance with workplace procedures
3 Complete work and document solutions to discovered problem
  • 3.1 WHS/OHS work completion risk control measures and procedures are followed
  • 3.2 Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.3 Solutions used to solve circuit problems are justified and documented in accordance with workplace procedures
  • 3.4 Work completion is documented and relevant person/s notified in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC642 UEENEEI126A Provide solutions to pneumatic-hydraulic system operations Unit of competency