Unit of competency Outline

Date retreived
23/07/2026 12:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct bitumen sprayer operations

Conduct bitumen sprayer operations

Unit of competency
National Code
RIICBS307E
State Code
OBM72
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
25/09/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
25/09/2020
Nominal Hours
84
Description
This unit describes the skills and knowledge required to conduct bitumen sprayer operations in civil construction. It applies to those working in operational roles. The individual is generally a skilled operator and may provide theoretical advice and support a team.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Prepare for bitumen sprayer operations
  • 1.1 Obtain, interpret and confirm work requirements
  • 1.2 Access, interpret and apply bitumen sprayer operations documentation and confirm the work activity is compliant
  • 1.3 Identify environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Confirm and comply with environmental protection, safety and traffic management signage requirements
  • 1.6 Select plant, tools and equipment required for tasks and check for faults within scope of own role
  • 1.7 Obtain and interpret emergency procedures and identify steps required in case of fire, accident and other emergencies
2. Set up and load sprayer
  • 2.1 Check ancillary tanks are full and determine required materials to perform spray operations
  • 2.2 Check tank for contamination and apply prevention methods
  • 2.3 Calculate spraying speed and pump rpm required for job
  • 2.4 Set required amount of cutter and fit required number and size of jets to spray bar
  • 2.5 Check previous load details for compatibility
  • 2.6 Load tank with the prescribed type and quantity of material and add additives and mix where required
  • 2.7 Check heat and maintain temperature of the material
  • 2.8 Measure, calculate and record material quantities and additives
3. Operate bitumen sprayer
  • 3.1 Carry out start-up, park, shutdown and secure equipment procedures
  • 3.2 Select and modify bitumen spraying techniques as required by work conditions
  • 3.3 Set control valves for operation according to job requirements
  • 3.4 Drive and operate equipment that minimises hand spraying requirements
  • 3.5 Conduct, control and monitor spraying operations without damaging property or vehicles
4. Operate hand lance
  • 4.1 Inspect and confirm hand lance is fit for purpose
  • 4.2 Select hand lancing techniques required by work conditions
  • 4.3 Conduct, control and adjust hand spraying operations as required by task
  • 4.4 Carry out hand spraying operations adjacent to traffic
5. Carry out operator maintenance and clean up
  • 5.1 Unload and empty tank into storage and waste as required according to workplace procedures and environmental requirements
  • 5.2 Clean tank interior, spray bar, tools and equipment according to workplace procedures
  • 5.3 Clear work area and dispose of and recycle materials as required according to workplace procedures and environmental requirements
  • 5.4 Prepare machine for maintenance
  • 5.5 Conduct inspection and fault finding
  • 5.6 Carry out scheduled maintenance tasks of plant, tools and equipment
  • 5.7 Process written maintenance records
  • 5.8 Carry out housekeeping to workplace requirements
No information
No information
Replaces
State Code National Code Title Type
WH060 RIICBS307D Conduct bitumen sprayer operations Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
BGL0 RII30920 Certificate III in Civil Construction Qualification