Unit of competency Outline

Date retreived
23/07/2026 6:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair carbon fibre bicycle frames

Repair carbon fibre bicycle frames

Unit of competency
National Code
AURBTY003
State Code
AXE30
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to determine the extent of damage to carbon fibre bicycle frames, and undertake the necessary repairs. It involves preparing for the work, selecting and using specialist tools and equipment, assessing frame damage, selecting repair materials, repairing and finishing the carbon fibre frame to manufacturer specifications, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect carbon fibre bicycle frame
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Bicycle history, including riding incidents and accidents, is determined through discussion with customer
  • 1.3 Bicycle frame is inspected for faults or damage using visual inspection methods and by comparing measurements against manufacturer specifications
  • 1.4 Non-destructive testing is arranged, as required
  • 1.5 Hazards associated with the work are identified and risks are managed
  • 1.6 Repair assessment, including replacement options for bicycle frame, is completed
  • 1.7 Repair cost is calculated and documented for customer approval
2. Prepare for repair
  • 2.1 Work area is prepared and repair sequence, including post-repair testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
  • 2.2 Replacement parts and repair materials are prepared according to frame manufacturer specifications
  • 2.3 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
3. Repair carbon fibre frame
  • 3.1 Frame surface is prepared for repair and contaminants are removed
  • 3.2 Repairs to bicycle frame, including carbon fibre tubes and seat stay, are carried out according to repair plan, manufacturer specifications, and safety and environmental requirements
  • 3.3 Repaired area of frame is sealed according to manufacturer specifications
  • 3.4 Required replacement parts are checked and fitted according to manufacturer specifications
  • 3.5 Tests are completed to ensure fibre frame repairs comply with manufacturer specifications, and problems outside scope of own role are referred to appropriate person
  • 3.6 Carbon fibre bicycle frame is cleaned in preparation for delivery to customer
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF066 AURBTY4003 Assess carbon fibre frames for repair Unit of competency