Unit of competency Outline
Date retreived
22/07/2026 11:36 PM AWST
22/07/2026 11:36 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Provide assistance in cabinet installation
Provide assistance in cabinet installation
Unit of competency
National Code
MSFKB2002
MSFKB2002
State Code
WI555
WI555
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040311 - Carpentry And Joinery
Original Release Date
19/06/2014
Nominal Hours
10
Description
This unit of competency covers assisting in the on-site installation of cabinets for kitchens or bathrooms. It includes assembling cabinets, fitting components, and fixing cabinets to wall and floor surfaces, and making a limited range of adjustments in the installation of new or renovated kitchens and bathrooms. No licensing, legislative or certification requirements apply to this unit at the time of publication.Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Lay out components and materials according to installation plan
- 1.1 Work health and safety (WHS) requirements, including personal protective equipment are identified
- 1.2 Floor layout and individual cabinet construction requirements are determined from the installation plan or through checking with supervisor or tradesperson
- 1.3 Components are laid out to match sequence of assembly
- 1.4 Product codes and labels are checked for any special installation requirements
2 Assemble carcass
- 2.1 Joining methods are applied according to the installation plan or instructions from supervisor or tradesperson
- 2.2 Facings are completed
- 2.3 Carcass levels are checked
- 2.4 Components are attached
- 2.5 Minor adjustments are made according to instruction from supervisor or tradesperson
- 2.6 Carcasses are completed and checked for quality against instructions
- 2.7 Hand and power tools are used safely and according to operating instructions
3 Fix cabinets as specified by site supervisor or tradesperson
- 3.1 Cabinet fixing techniques are confirmed with supervisor or tradesperson according to site requirements
- 3.2 Cabinets are fixed to walls and floors according to the installation plan and instruction of supervisor or tradesperson
- 3.3 Components are fixed according to installation instructions
4 Finish work
- 4.1 Cabinets are cleaned and checked for quality
- 4.2 Site is cleaned and all tools put away
- 4.3 Project documentation is completed
- 4.4 Waste is disposed of according to environmental standards
- 4.5 Property is secured
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D2762 | LMFKB2002A | Provide assistance in cabinet installation | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEM23 | MSFKB2004 | Provide assistance in cabinetry installation | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J727 | MSF20313 | Certificate II in Furniture Making | Qualification |