Unit of competency Outline
Date retreived
24/07/2026 12:09 AM AWST
24/07/2026 12:09 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Set up, operate and maintain a quilting machine
Set up, operate and maintain a quilting machine
Unit of competency
National Code
LMFMB3004B
LMFMB3004B
State Code
W8705
W8705
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/09/2008
Nominal Hours
80
Description
This unit covers the competency to set up operate and maintain a quilting machine which uses automated processes to apply padding/foam to plain or patterned fabric.
Notes
Elements and Performance Criteria
1. Plan work operations
- 1.1. Work instructions are used to determine job requirements, including quality, materials, equipment and quantities
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed through the work
- 1.3. Material for processing is selected and inspected for quality
- 1.4. Machine, the thread guides and needles are identified and checked for safe and effective operation
- 1.5. Procedures are determined for minimising waste material
- 1.6. Procedures are identified for maximising energy efficiency while completing the job
2. Set up machines
- 2.1. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
- 2.2. Trial runs are conducted to check machine operation, accuracy and quality of finished work
- 2.3. Necessary adjustments are made to machine settings
3. Complete the quilting process
- 3.1. Machine start-up procedure is carried out in accordance with manufacturer instructions
- 3.2. Materials are fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures
- 3.3. Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations
- 3.4. Machine operation, including inputs and outcomes, is monitored to ensure product quality and output
- 3.5. Waste quantities are checked and minimised
- 3.6. Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedure
- 3.7. Problems with the required work or the operation of the machine are identified and reported to appropriate persons
4. Clean up work area and maintain equipment
- 4.1. Material that can be reused is collected and stored
- 4.2. Waste and scrap is removed following workplace procedures
- 4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
- 4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
- 4.5. Operator maintenance is completed in accordance with manufacturer specifications and site procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
Work involves applying and processing foam/padding to the underside of plain or patterned fabric using a quilting design
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate judgement and problem solving skills in the set up and operation of machines
Work will be performed in workplaces which are involved in the manufacture or restoration of mattresses and bases
Quilting machines
Automated quilting machines use semi-automated or automated processes to apply sewn patterns on fabric, foam and padding
Machines are to include either semi-automated or fully automated quilting machines
Material to be processed may include but is not limited to:
plain or patterned fabrics
padding materials and foam
Operator maintenance includes:
the cleaning and refurbishing of the quilting needle unit, thread guides, shuttles and loopers
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use and operations of tools
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
Work involves applying and processing foam/padding to the underside of plain or patterned fabric using a quilting design
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate judgement and problem solving skills in the set up and operation of machines
Work will be performed in workplaces which are involved in the manufacture or restoration of mattresses and bases
Quilting machines
Automated quilting machines use semi-automated or automated processes to apply sewn patterns on fabric, foam and padding
Machines are to include either semi-automated or fully automated quilting machines
Material to be processed may include but is not limited to:
plain or patterned fabrics
padding materials and foam
Operator maintenance includes:
the cleaning and refurbishing of the quilting needle unit, thread guides, shuttles and loopers
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use and operations of tools
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Read and interpret cutting lists and job specifications to prepare for work
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify, set up and operate a semi-automated or automated quilting machine to complete the following:
setting up and applying at least two different fabrics and padding/foam
identifying and correcting at least two real or simulated machining faults
one cam change
Conduct operator maintenance on the machines and equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource implications
Access to a semi-automated or automated quilting machine, including tooling equipment and accuracy devices.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Read and interpret cutting lists and job specifications to prepare for work
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify, set up and operate a semi-automated or automated quilting machine to complete the following:
setting up and applying at least two different fabrics and padding/foam
identifying and correcting at least two real or simulated machining faults
one cam change
Conduct operator maintenance on the machines and equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource implications
Access to a semi-automated or automated quilting machine, including tooling equipment and accuracy devices.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0349 | LMFMB3004A | Set up, operate and maintain a quilting machine | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI578 | MSFMB2007 | Set up, operate and maintain a quilting machine | Unit of competency |
