Unit of competency Outline

Date retreived
23/07/2026 3:14 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Control tuning hammers

Control tuning hammers

Unit of competency
National Code
MSFPT4007
State Code
OEL84
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
25
Description
This unit describes the skills and knowledge required to control tuning hammers by accurately moving the tuning pins in very small increments. This unit applies to piano technologists who work in accordance with established procedures, using discretion, judgement and problem-solving to apply and communicate technical solutions to resolve predictable and unpredictable issues. They use factual, technical and theoretical knowledge to identify, analyse, compare and act on information from a range of sources.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan and prepare for using tuning hammers
  • 1.1 Analyse and confirm job requirements with personnel, customer or from workplace documentation
  • 1.2 Identify and follow work health and safety requirements including physical and ergonomic needs
  • 1.3 Establish and maintain communication with others involved with work to ensure efficient workflow, coordination, personnel cooperation and safety
  • 1.4 Analyse written instructions and apply to job requirements
  • 1.5 Select tools and equipment consistent with needs of job, inspect for serviceability and safety, and repair any faults or report in accordance with workplace procedures
2. Set pin in specified position
  • 2.1 Set pin at desired pitch utilising a pitch standard, within accuracy constraints to ± 0.5 cents
  • 2.2 Strike key using stabilising blows
  • 2.3 Demonstrate coordinated motor and auditory reflexes throughout tuning
  • 2.4 Tune and stabilise strings using appropriate techniques
3. Clean up work area
  • 3.1 Check, clean and store equipment and any unused materials in accordance with workplace procedures
  • 3.2 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 3.3 Complete required workplace records
No information
No information
Replaces
State Code National Code Title Type
WI607 MSFPT3009 Develop control of tuning hammers Unit of competency
State Code National Code Title Type
BIK3 MSF40522 Certificate IV in Piano Technology Qualification
AF041 MSFSS00016 Piano Tuning Skill set