Unit of competency Outline
Date retreived
22/07/2026 11:35 PM AWST
22/07/2026 11:35 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform table-based operations
Perform table-based operations
Unit of competency
National Code
LMTFP2011B
LMTFP2011B
State Code
W7280
W7280
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
20/10/2014
Field of Education
030109 - Footwear Making
Original Release Date
20/10/2014
Nominal Hours
50
Description
This unit covers the skills and knowledge to undertake table-based operations in footwear production.
Notes
Elements and Performance Criteria
1 Prepare work pieces
- 1.1 Work bundle is received, checked and any follow-up action assessed.
- 1.2 Quality of received component parts is assessed.
- 1.3 Work pieces are laid out in correct sequence.
2 Prepare workstation
- 2.1 Workstation is set up according to work requirements and to achieve operator comfort and minimise fatigue.
- 2.2 Tools are cleaned and checked and minor maintenance carried out to ensure operational readiness.
- 2.3 Records are maintained.
3 Carry out table-based activities
- 3.1 Table-based operations, appropriate to production task, are performed to quality specifications.
- 3.2 Tools are used according to OHS practices to achieve specifications.
- 3.3 Appropriate materials are used correctly to achieve specifications.
- 3.4 OHS practices are followed.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Table-based operations
may apply to various aspects of footwear production processes including:
preparation for cutting
preparation of uppers
preparation for assembly/making of shoes
making of components
making/fitting trims
inspection of incoming materials
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Table-based operations
may apply to various aspects of footwear production processes including:
preparation for cutting
preparation of uppers
preparation for assembly/making of shoes
making of components
making/fitting trims
inspection of incoming materials
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work before commencing operations
applying techniques over the range of required table-based operations
use processes and hand tools associated with table-based operations
carry out minor tool maintenance
apply OHS practices in work operations, with particular reference to adhesives and use of tools
maintain accurate records
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects of evidence
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work before commencing operations
applying techniques over the range of required table-based operations
use processes and hand tools associated with table-based operations
carry out minor tool maintenance
apply OHS practices in work operations, with particular reference to adhesives and use of tools
maintain accurate records
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6573 | LMTFP2011A | Perform table-based operations | Unit of competency |
| AXP69 | LMTPRFT09BA | Perform table-based operations - 2 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAW32 | MSTFP2011 | Perform table-based operations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W383 | LMT40407 | Certificate IV in Custom-made Footwear | Qualification |
| W373 | LMT30707 | Certificate III in Footwear Production | Qualification |
| W361 | LMT21007 | Certificate II in Footwear Production (Complex or Multiple Processes) | Qualification |
| W360 | LMT20907 | Certificate II in Footwear Production (Intermediate) | Qualification |