Unit of competency Outline

Date retreived
23/07/2026 2:25 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply soft rubber techniques

Apply soft rubber techniques

Unit of competency
National Code
MSFFF3013
State Code
OEL32
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030117 - Furniture Polishing
Original Release Date
19/04/2023
Nominal Hours
20
Description
This unit describes the skills and knowledge required to use soft rubber techniques to apply polish or spirit varnish to solid timber and manufactured board surfaces.Furniture finishing workers with this competency follow established procedures, using discretion, judgement and problem-solving to identify and resolve potential issues. They recognise dependencies and use cooperative approaches to optimise workflow and productivity.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements including surface characteristics and required surface finish from work documentation
  • 1.2 Plan for task by identifying processing and application techniques, time and safety requirements and efficient work methods
  • 1.3 Identify and follow work health and safety requirements
  • 1.4 Identify tools, equipment and accessories to meet task requirements and check for safety and functionality.
2. Prepare for application of materials
  • 2.1 Check surfaces for contamination and correct preparation in accordance with workplace procedures and standards
  • 2.2 Identify products with surface or other faults and perform required repairs
  • 2.3 Identify and prepare required finishing materials
  • 2.4 Perform trial application of polish or varnish to check rubber operation, materials consistency and conformity with specified surface finish
  • 2.5 Identify and rectify faults in accordance with workplace procedures
3. Apply soft rubber
  • 3.1 Lightly sand surface and check for and rectify defects in accordance with workplace procedures
  • 3.2 Charge rubber in accordance with job requirements
  • 3.3 Apply soft rubber finish using correct pressure and suitable rubber movements
  • 3.4 Inspect surface and repair or rectify any defects in accordance with workplace procedures
4. Clean work area and maintain equipment
  • 4.1 Check, clean and store equipment and unused materials in accordance with workplace procedures
  • 4.2 Tag unserviceable equipment, identify faults and inform appropriate personnel in accordance with workplace procedures
  • 4.3 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.4 Complete required workplace records
No information
No information
Replaces
State Code National Code Title Type
WI324 MSFFF3004 Apply soft rubber techniques Unit of competency
State Code National Code Title Type
BIJ9 MSF30122 Certificate III in Furniture Finishing Qualification