Elements and Performance Criteria

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Work health and safety is to be according to commonwealth, state and territory legislation and regulations and may include:
handling of materials
hazard control
personal protective clothing and equipment prescribed under legislation, regulations and workplace policies and practices
safe operating procedures, including recognising and preventing hazards associated with:
electricity
hazardous materials and substances
service lines
surrounding structures and facilities
trip hazards
use of tools and equipment
work site visitors and the public
working at heights
working in proximity to others
use of firefighting equipment
use of first aid equipment
workplace environment and safety.

Environmental requirements cover water quality management and may include:
clean-up protection
stormwater protection
waste management.

Quality assurance requirements may include:
environment policy
Environment Protection Authority (EPA)
internal company quality assurance policy and risk management strategy
International Standards Organisation
site safety plan
workplace operations and procedures.

Statutory and regulatory authorities include:
commonwealth, state or territory, and local authorities administering applicable Acts, regulations and codes of practice.

Tools and equipment may include:
elevated work platforms
fall protection equipment
hand and power tools
ladders
lifting and load shifting equipment, including:
chain blocks
cranes
forklifts
hand trolleys
hoists and jacks
restricted height scaffolds
rollers
measuring equipment.

Roof sheeting may include:
metal and non-metallic (clear and coloured) sheets
other approved materials.

Installation may include:
fitting safety mesh and rainwater fittings.

Information may include:
charts and hand drawings
instructions issued by authorised organisational or external personnel
manufacturer specifications and instructions
material safety data sheets (MSDS)
memos
organisation work specifications and requirements
plans and sketches
regulatory and legislative requirements, particularly those pertaining to:
building codes
WHS and environmental requirements
plumbing regulations
relevant Australian standards
safe work procedures relating to selecting and installing roof sheeting and wall cladding
signage
verbal, written and graphical instructions
work bulletins
work schedules, plans and specifications.

Insulation materials may include:
batts
interlocking sections
loose fill
rolls.

Materials for selecting and installing roof sheeting and wall cladding may include:
approved roof battens
cappings
fixings and fasteners
flashings
insulation, including:
fibreglass
laminate
polyethylene
reflective foil
straw
wool
insulation supports, including:
plaster board
timber board
wire mesh
metal roof covers of concealed or pierce fixed types
moulds
plastic building sheets for walls and roofs
rain water goods, including:
aluminium
copper
fibreglass
polycarbonate
stainless steel
steel
zincalume
rivets and sealants
self drilling and tapping screws
trims
other approved materials.

Fault reporting:
may be written or verbal
is to be according to company's workplace procedures.

Sustainability principles and concepts:
cover the current and future social, economic and environmental use of resources
may include:
efficient energy use
efficient use and recycling of material
disposing of waste material to ensure minimal environmental impact
selecting appropriate components to ensure minimal environmental impact.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment providing that simulated or project-based assessment techniques fully replicate plumbing and services workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to provide evidence of:
locating, interpreting and applying relevant information, relevant Australian standards and specifications to selecting and installing roof coverings and wall cladding
applying safety requirements throughout the work sequence, including electrical safety requirements and the use of personal protective clothing and equipment
given the plans and specifications, calculating the requirements and selecting and installing roof sheeting, wall cladding and insulation for two roof structures, each roof structure being a minimum of 4 square metres area, one of which incorporates 2 square metres of non-metallic roof sheeting
both installations may include insulation, flashings and cappings, using the pierced and concealed fastening methods, ensuring:
application of sustainability principles and concepts throughout the installation
correct identification of requirements and details of proposed installation
correct fit of the completed installation
correct selection and use of appropriate processes, tools and equipment
completing all work to specification
compliance with regulations, relevant Australian standards and organisational quality procedures and processes
communicating and working effectively and safely with others.

Context of and specific resources for assessment
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian standards’ requirements.
Resource implications for assessment include:
an induction procedure and requirement
realistic tasks or simulated tasks covering the minimum task requirements
relevant specifications and work instructions
tools and equipment appropriate to applying safe work practices
support materials appropriate to activity
workplace instructions relating to safe working practices and addressing hazards and emergencies
material safety data sheets
research resources, including industry-related systems information.
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package
include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application
reinforce the integration of employability skills with workplace tasks and job roles
confirm that competency is verified and able to be transferred to other circumstances and environments.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.
Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.
Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.